The full potential of esthetic ceramic-based restorations cannot yet be realized. Shaping-induced damage, exacerbated by fatigue damage during normal chewing, dramatically reduces their initial strength. Since residual strengths fall to values close to occlusal forces, it is not surprising that clinical success of molar crowns has been disappointing. All-ceramic posterior bridges with acceptable success rates over 5-10 years remain a dream. Survival of the crowns is a complex set of interactions between material, fabrication, design, and service variables. In Phase I, our team developed fundamental understanding in damage initiation and accumulation in materials recommended for posterior dental crowns. The influence of microstructure, fatigue and machining parameters on damage have been characterized in monolithic materials. By layering these materials, the conflicting demands for strength and esthetics can be met. Through rational design, the inevitable damage can be managed, yielding a damage tolerant structure which can withstand microcracks within a layer without sacrificing the structural integrity of the system. The overall objective of our revised proposal is to develop a fundamental understanding of damage initiation and accumulation in all-ceramic dental crowns as a function of materials, crown design, and fabrication variables. Our overall approach to meeting this objective is to progress systematically from simple flat-layer structures in normal axial loading toward crown geometries in complex loading, working with clinically-relevant materials at all stages. Ultimately, crowns on extracted teeth mounted in a pseudo bone-PDL system will be subjected to typical cyclic occlusal loading in a wet environment. Our """"""""deliverables"""""""" are (1) a design specification guiding development of new materials and (2) fundamental understanding of damage initation, propagation, and accumulation, culminating in a robust model for predicting clinical behavior of combinations of new materials, tooth preparation design, and crown design. With these outcomes, it will be possible for the first time to use basic materials properties to accurately predict application-based performance of new materials. Investigation to accomplish these goals are organized in four projects: (1) Damage Modes and Failure Mechanisms, (2) Complex Loading, Crown Geometry, and Performance, (3) Novel Joining Methods and Interfacial Fracture Mechanics, and (4) Fatigue Performance of Layered Ceramic Crowns on Teeth. The scientific effort will be complemented and supported by two cores: (1) Statistics and Data Analysis Core and (2) Integration and Administration Core.

Agency
National Institute of Health (NIH)
Institute
National Institute of Dental & Craniofacial Research (NIDCR)
Type
Research Program Projects (P01)
Project #
5P01DE010976-10
Application #
7214873
Study Section
Special Emphasis Panel (ZDE1)
Project Start
Project End
Budget Start
2006-04-01
Budget End
2007-03-31
Support Year
10
Fiscal Year
2006
Total Cost
$192,096
Indirect Cost
Name
New York University
Department
Type
DUNS #
041968306
City
New York
State
NY
Country
United States
Zip Code
10012
Yin, Ling (2012) Property-process relations in simulated clinical abrasive adjusting of dental ceramics. J Mech Behav Biomed Mater 16:55-65
Silva, N R F A; Bonfante, E A; Rafferty, B T et al. (2011) Modified Y-TZP core design improves all-ceramic crown reliability. J Dent Res 90:104-8
Rafferty, Brian T; Janal, Malvin N; Zavanelli, Ricardo A et al. (2010) Design features of a three-dimensional molar crown and related maximum principal stress. A finite element model study. Dent Mater 26:156-63
Bonfante, Estevam A; Sailer, Irena; Silva, Nelson R F A et al. (2010) Failure modes of Y-TZP crowns at different cusp inclines. J Dent 38:707-12
Guess, P C; Zhang, Y; Kim, J-W et al. (2010) Damage and reliability of Y-TZP after cementation surface treatment. J Dent Res 89:592-6
Bonfante, Estevam A; da Silva, Nelson R F A; Coelho, Paulo G et al. (2009) Effect of framework design on crown failure. Eur J Oral Sci 117:194-9
Coelho, P G; Silva, N R; Bonfante, E A et al. (2009) Fatigue testing of two porcelain-zirconia all-ceramic crown systems. Dent Mater 25:1122-7
Rekow, E Dianne; Zhang, Guangming; Thompson, Van et al. (2009) Effects of geometry on fracture initiation and propagation in all-ceramic crowns. J Biomed Mater Res B Appl Biomater 88:436-46
Coelho, Paulo G; Silva, Nelson R; Thompson, Van P et al. (2009) Effect of proximal wall height on all-ceramic crown core stress distribution: a finite element analysis study. Int J Prosthodont 22:78-86
Zhang, Yu; Kim, Jae-Won; Bhowmick, Sanjit et al. (2009) Competition of fracture mechanisms in monolithic dental ceramics: flat model systems. J Biomed Mater Res B Appl Biomater 88:402-11

Showing the most recent 10 out of 54 publications