Low back pain is responsible for approximately 90 billion dollars annual costs in the United States. Previous studies of disc structural integrity and mechanical function have identified key events in progressive disc degeneration including early loss of nucleus pulposus (NP) glycosaminoglycan content (which decreases NP pressure) progressing to annulus fibrosus (AF) radial and circumferential tears. While AF tears are thought to occur in response to alterations in the AF loading environment stemming from decreased NP pressure, the physical mechanisms for initiation and progression of AF tears are not understood. Very little is known about how the internal disc mechanics are affected by the state of degeneration or by physiological factors (e.g., diurnal hydration, loading rate). Moreover, local disc mechanics at the site of tears are completely unknown. We hypothesize that internal AF stresses and strains are elevated in response to reduced NP pressure and other degenerative changes affecting AF material properties, that local stress-strain concentrations occur adjacent to AF tears, and that dynamic loading further elevates the AF stress and strain. The objectives of this proposal are to quantify internal AF stress and strain and the effect of degenerative state (reduced NP pressure, AF tears), hydration, and dynamic loading on internal disc mechanics using an integrated experimental and modeling approach. Integration of experimental methods and models, which inform each other to address hypotheses for mechanical mechanisms of progressive disc degeneration, is a distinctive approach, and is our focus in the following 3 Specific Aims.
Aim 1 : Quantify the strain adjacent to AF tears under physiological loading of an intact bone-disc- bone unit. High-field microMRI, a custom built MR-compatible loading system, and state-of-the-art image registration will be applied to evaluate the role of degenerative state on AF stress-strain behavior and to specifically quantify strain fields around AF tears already present in the human cadaveric disc. Location, magnitude, and distribution of strains will be identified for each loading condition (compression, torsion, bending) at equilibrium.
Aim 2 : Develop a new disc FE model and validate it by comparing predicted and measured internal disc strains. The model will incorporate a hyperelastic biphasic constitutive material formulation that includes recently measured NP and AF tissue properties for fiber-reinforced anisotropy, nonlinearity, and osmotic swelling pressure.
Aim 3 : Calculate stresses and strains associated with degeneration, loading rate, hydration, and AF tears using the model from Aim 2. Incorporate degeneration by geometry and material properties and validate the effects of degeneration as done in Aim 2 for the non-degenerate disc. This work is significant in that it evaluates physical mechanisms in disc degeneration, a critical step in understanding and treating low back pain.
Lumbar disc degeneration and low back pain are both costly and devastating to the quality of life. Very little is known about how the internal disc mechanics are altered with degeneration and local mechanics at the site of tears are completely unknown. The objectives of this proposal are to quantify internal AF stress and strain and the effect of degenerative state, hydration, and dynamic loading using an integrated experimental and modeling approach. This work is significant in that it evaluates physical mechanisms in disc degeneration, a critical step in understanding and treating low back pain.
|Peloquin, John M; Santare, Michael H; Elliott, Dawn M (2016) Advances in Quantification of Meniscus Tensile Mechanics Including Nonlinearity, Yield, and Failure. J Biomech Eng 138:021002|
|DeLucca, John F; Cortes, Daniel H; Jacobs, Nathan T et al. (2016) Human cartilage endplate permeability varies with degeneration and intervertebral disc site. J Biomech 49:550-7|
|Showalter, Brent L; DeLucca, John F; Peloquin, John M et al. (2016) Novel human intervertebral disc strain template to quantify regional three-dimensional strains in a population and compare to internal strains predicted by a finite element model. J Orthop Res 34:1264-73|
|Wright, Alexander C; Yoder, Jonathon H; Vresilovic, Edward J et al. (2016) Theory of MRI contrast in the annulus fibrosus of the intervertebral disc. MAGMA 29:711-22|
|Peloquin, John M; Elliott, Dawn M (2016) A comparison of stress in cracked fibrous tissue specimens with varied crack location, loading, and orientation using finite element analysis. J Mech Behav Biomed Mater 57:260-8|
|DeLucca, John F; Peloquin, John M; Smith, Lachlan J et al. (2016) MRI quantification of human spine cartilage endplate geometry: Comparison with age, degeneration, level, and disc geometry. J Orthop Res 34:1410-7|
|Cortes, Daniel H; Suydam, Stephen M; Silbernagel, Karin Grävare et al. (2015) Continuous Shear Wave Elastography: A New Method to Measure Viscoelastic Properties of Tendons in Vivo. Ultrasound Med Biol 41:1518-29|
|Showalter, Brent L; Elliott, Dawn M; Chen, Weiliam et al. (2015) Evaluation of an In Situ Gelable and Injectable Hydrogel Treatment to Preserve Human Disc Mechanical Function Undergoing Physiologic Cyclic Loading Followed by Hydrated Recovery. J Biomech Eng 137:081008|
|Suydam, Stephen M; Soulas, Elizabeth M; Elliott, Dawn M et al. (2015) Viscoelastic properties of healthy achilles tendon are independent of isometric plantar flexion strength and cross-sectional area. J Orthop Res 33:926-31|
|Cortes, Daniel H; Magland, Jeremy F; Wright, Alexander C et al. (2014) The shear modulus of the nucleus pulposus measured using magnetic resonance elastography: a potential biomarker for intervertebral disc degeneration. Magn Reson Med 72:211-9|
Showing the most recent 10 out of 41 publications