Dental ceramics have become increasingly prolific as restorative materials because of their esthetic appearance, wear resistance, thermal insulation, and biocompatibility. Unfortunately, dental ceramics are brittle in comparison to dental alloys. This lack of fracture resistance compromises their strength and reliability, resulting in decreased lifetime expectancy. The magnitude of occlusal load rarely exceeds 324 N in humans, and finite element models have predicted these loads to induce stresses of 22 to 87 MPa in molar crowns. Traditional dental ceramics can withstand 11.6 MPa (aluminous porcelains) to 240 MPa (Dicor) of stress before single-cycle failure. In spite of this margin of safety, failure rates as high at 30% (Dicor) after seven years in vivo have been reported. Cyclic fatigue loading clearly has an impact on the maximum stress that can be withstood, and fatigue failure is rightfully a concern of dental ceramic researchers. Fatigue failure of ceramics occurs when initial flaws reach a critical stress intensity following subcritical crack growth (SCG). The overall goals of this project are to develop easier methods of measuring SCG for dental ceramics and to develop more accurate methods for predicting all-ceramic prosthesis lifetimes through the following specific aims: (1) To develop a method for constructing accurate S-N-P (stress-lifetime-failure probability) models for dental ceramics from cyclic fatigue measurements on a minimum number of standard geometry specimens. (2) To develop a method for determining the individual contributions of stress corrosion and cyclic degradation to SCG for a given ceramic and stress function. (3) To verify the accuracy of prosthesis lifetimes predicted using finite element software in conjunction with time-dependent reliability software. (4) To determine how the distribution of fatigue strength relates to the distribution of single-cycle strength. (5) To determine whether crack healing through surface remodeling affects fatigue lifetime.
Specific Aims 1 -4 will investigate two dental ceramics: one that exhibits constant fracture toughness and one that exhibits dependence of fracture toughness on flaw size (R-curve behavior). Porcelain that exhibits crack healing behavior will be analyzed in Specific Aim 5. ? ?

Agency
National Institute of Health (NIH)
Institute
National Institute of Dental & Craniofacial Research (NIDCR)
Type
Research Project (R01)
Project #
5R01DE013358-05
Application #
7176234
Study Section
Special Emphasis Panel (ZRG1-MOSS-K (02))
Program Officer
Drummond, James A
Project Start
1999-12-01
Project End
2007-07-31
Budget Start
2007-02-01
Budget End
2007-07-31
Support Year
5
Fiscal Year
2007
Total Cost
$29,637
Indirect Cost
Name
Texas A&M University
Department
Dentistry
Type
Schools of Dentistry
DUNS #
835607441
City
College Station
State
TX
Country
United States
Zip Code
77845
Borba, Márcia; Duan, Yuanyuan; Griggs, Jason A et al. (2015) Effect of ceramic infrastructure on the failure behavior and stress distribution of fixed partial dentures. Dent Mater 31:413-22
Joshi, Gaurav V; Duan, Yuanyuan; Della Bona, Alvaro et al. (2014) Contributions of stress corrosion and cyclic fatigue to subcritical crack growth in a dental glass-ceramic. Dent Mater 30:884-90
McMurphy, Timothy B; Harris, Christopher A; Griggs, Jason A (2014) Accuracy and precision of fractal dimension measured on model surfaces. Dent Mater 30:302-7
Borba, Márcia; Cesar, Paulo F; Griggs, Jason A et al. (2013) Step-stress analysis for predicting dental ceramic reliability. Dent Mater 29:913-8
Joshi, Gaurav V; Duan, Yuanyuan; Neidigh, John et al. (2013) Fatigue testing of electron beam-melted Ti-6Al-4V ELI alloy for dental implants. J Biomed Mater Res B Appl Biomater 101:124-30
Joshi, Gaurav V; Duan, Yuanyuan; Della Bona, Alvaro et al. (2013) Fatigue loading and R-curve behavior of a dental glass-ceramic with multiple flaw distributions. Dent Mater 29:1123-31
Scherrer, Susanne S; Cattani-Lorente, Maria; Vittecoq, Eric et al. (2011) Fatigue behavior in water of Y-TZP zirconia ceramics after abrasion with 30 ?m silica-coated alumina particles. Dent Mater 27:e28-42
Borba, Marcia; de Araujo, Maico D; de Lima, Erick et al. (2011) Flexural strength and failure modes of layered ceramic structures. Dent Mater 27:1259-66
Borba, Marcia; Cesar, Paulo F; Griggs, Jason A et al. (2011) Adaptation of all-ceramic fixed partial dentures. Dent Mater 27:1119-26
Borba, Marcia; de Araujo, Maico D; Fukushima, Karen A et al. (2011) Effect of the microstructure on the lifetime of dental ceramics. Dent Mater 27:710-21

Showing the most recent 10 out of 19 publications