The objective of this proposal is to reduce the invasiveness and increase the safety of surgical procedures at the skull base by introducing a new robotic system for natural orifice skull base surgery. Despite compelling patient benefits compared to highly invasive transfacial and transcranial approaches, the endonasal approach - in which surgical instruments are deployed to the skull base through a nostril and the nasal cavities - is only used in a small percentage of cases due to limitations in current surgical instrumentation. The proposed system aims to remedy this through a new kind of surgical robot with needle-diameter, tentacle-like instruments. It will be able to transport surgical tools and cameras along curvilinear paths and work around corners (e.g. enable physicians to resect tumors by curving around the carotid arteries), while providing the physician with a comfortable and intuitive control interface conceptually similar to that of the da Vinci Surgical System. Such a robot, with instruments made using concentric, curved, elastic tubes, has the potential to profoundly impact public health because: (1) incidence is high - 15-20% of all primary brain tumors occur in the pituitary and 1 in 5 people will develop one, with 1 in 120 requiring skull base surgery (>1cm tumor); (2) traditional approaches are highly invasive - they require either deconstruction of facial tissue and bone, or a craniotomy and associated trauma to the brain; and (3) there exists an underutilized, yet clinically proven alternative - the endonasal approach, which is not more widely deployed due to the difficulty of accomplishing it using conventional surgical tools. The proposed system will be developed through three Specific Aims.
Aim 1 involves measuring surgical forces and geometry and using this information with mechanics models to optimally design the proposed robotic system.
Aim 2 addresses developing control, force feedback, and assistance algorithms for the surgeon, together with visual displays showing endoscope images, registered preoperative medical images, and robot instrument locations. Magnetic tracking will enable force sensing and enhance the accuracy of surgical navigation.
Aim 3 consists of experiments designed to evaluate robot performance in reaching surgically relevant locations, and in removing tissue in laboratory settings, in skull phantoms, and in cadaver studies. The final objective of this R01 is a fully functional robotic system with al the components necessary for operating room use, to assist the surgeon in natural orifice (i.e. transnasal) skull base surgery.

Public Health Relevance

One in five people will develop a pituitary tumor (a kind of skull base tumor) at some point in their lives, and 1 in 120 of those will have tumors sufficiently large (1cm or larger) to require surgical removal, or will suffer from hormonal abnormalities, vision loss, and/or pain. Current surgical techniques typically require removing bone from the cranium or face, which is highly invasive. We propose to enable physicians to perform complex skull base surgeries via the natural orifice of the nostril, by creating new needle-diameter, image-guided, tentacle-like robotic instruments that provide enhanced surgical dexterity.

Agency
National Institute of Health (NIH)
Institute
National Institute of Biomedical Imaging and Bioengineering (NIBIB)
Type
Research Project (R01)
Project #
4R01EB017467-04
Application #
9066645
Study Section
Special Emphasis Panel (ZRG1)
Program Officer
Krosnick, Steven
Project Start
2013-07-01
Project End
2017-05-31
Budget Start
2016-06-01
Budget End
2017-05-31
Support Year
4
Fiscal Year
2016
Total Cost
Indirect Cost
Name
Vanderbilt University Medical Center
Department
Engineering (All Types)
Type
Biomed Engr/Col Engr/Engr Sta
DUNS #
004413456
City
Nashville
State
TN
Country
United States
Zip Code
37240
Riojas, Katherine E; Hendrick, Richard J; Webster 3rd, Robert J (2018) Can Elastic Instability be Beneficial in Concentric Tube Robots? IEEE Robot Autom Lett 3:1624-1630
Swaney, Philip J; York, Peter A; Gilbert, Hunter B et al. (2017) Design, Fabrication, and Testing of a Needle-Sized Wrist for Surgical Instruments. J Med Device 11:0145011-145019
Wellborn, Patrick S; Dillon, Neal P; Russell, Paul T et al. (2017) Coffee: the key to safer image-guided surgery-a granular jamming cap for non-invasive, rigid fixation of fiducial markers to the patient. Int J Comput Assist Radiol Surg 12:1069-1077
Anderson, Patrick L; Mahoney, Arthur W; Webster 3rd, Robert J (2017) Continuum Reconfigurable Parallel Robots for Surgery: Shape Sensing and State Estimation with Uncertainty. IEEE Robot Autom Lett 2:1617-1624
Gilbert, Hunter B; Hendrick, Richard J; Webster 3rd, Robert J (2016) Elastic Stability of Concentric Tube Robots: A Stability Measure and Design Test. IEEE Trans Robot 32:20-35
Travaglini, T A; Swaney, P J; Weaver, Kyle D et al. (2016) Initial Experiments with the Leap Motion as a User Interface in Robotic Endonasal Surgery. Robot Mechatron (2015) 37:171-179
Gilbert, Hunter B; Webster 3rd, Robert J (2016) Rapid, Reliable Shape Setting of Superelastic Nitinol for Prototyping Robots. IEEE Robot Autom Lett 1:98-105
York, Peter A; Swaney, Philip J; Gilbert, Hunter B et al. (2015) A Wrist for Needle-Sized Surgical Robots. IEEE Int Conf Robot Autom 2015:1776-1781
Baykal, Cenk; Torres, Luis G; Alterovitz, Ron (2015) Optimizing Design Parameters for Sets of Concentric Tube Robots using Sampling-based Motion Planning. Rep U S 2015:4381-4387
Torres, Luis G; Kuntz, Alan; Gilbert, Hunter B et al. (2015) A Motion Planning Approach to Automatic Obstacle Avoidance during Concentric Tube Robot Teleoperation. IEEE Int Conf Robot Autom 2015:2361-2367

Showing the most recent 10 out of 20 publications