An estimated 300,000 surgeries are performed annually in the United States to repair pelvic organ prolapse. Up to 40% will fail by 2 years prompting surgeons to seek materials to augment repairs, most commonly poly- propylene mesh. While current literature supports the use of a knitted, lightweight, wide pore polypropylene mesh, the ideal mesh has not been defined, and no mesh to date is without complications. In a primate sacro- colpopexy model, we showed that commonly used prolapse meshes have a negative impact on the morpho- logic, structural, and functional properties of the vagina and are associated with a marked foreign body response. We compared the response following implantation of the prototype prolapse mesh to that of newer generation prolapse meshes (lower weight, increased pore size/porosity, lower stiffness), the newer materials had less of a negative effect; however, no particular mesh characteristic was predictive of the host response. Most critically, our studies revealed that a mesh's pre-implantation characteristics were generally not reflective of what it assumed once mechanical tension was applied. Ex vivo mechanical tests in conjunction with computational analyses clearly demonstrated that prolapse meshes can have markedly unstable geometries resulting in a loss of porosity with small applications of tension and that stresses imposed on the vagina by the mesh have significant regional variability. These effects are largely driven by the pore geometry of the mesh, the degree of tension, and how the mesh is anchored. Here we hypothesize that two distinct host responses are associated with the most common mesh complications - pain and exposure, and that mechanical factors resulting from mesh tensioning (pore collapse & regional stress differences) drive the host response towards one direction or the other.
Our aims are guided by sophisticated computational studies and in-vitro testing of mesh which show that, using the same mesh in a non-human primate sacrocolpopexy model, we can create two distinct in-vivo mechanical environments that will drive the host-response towards fibrosis or degeneration.
In Aim 1, we test the hypothesis that pore collapse results in fibrosis by implanting a polypropylene mesh with pores oriented 45 degrees to the intended implantation direction to induce pore collapse.
In Aim 2, we test the hypothesis that regional variations in stress, (stress shielding), results in a degenerative response by implanting a mesh along the intended implantation direction with an anchoring strategy that maximizes the area of the vagina shielded from stress.
In Aim 3, we confirm our findings in Aims 1 and 2 in mesh excised from women for the complications of pain and mesh exposure. For additional comparison, we employ a group of non-human primates in which mesh is implanted to create an environment of both pore collapse and stress shielding to better simulate the complex in-vivo scenario. We anticipate that the findings from this study will be immediately clinically translatable and will aid in the identificaion and development of synthetic meshes for prolapse surgeries that minimize risk of mesh complications for millions of women world-wide.

Public Health Relevance

Reinforcement with synthetic mesh has been widely adopted to improve the effectiveness and durability of surgical repairs of pelvic organ prolapse (POP), with roughly 1/3 of POP surgeries employing mesh. In spite of good anatomical outcomes, prolapse meshes have become increasingly criticized due to a high rate of complications (see FDA Public Health Notification 2011). In this proposal, we test the hypothesis that two distinct host responses to mesh are associated with the most common mesh complications - pain and exposure, and that mechanical factors resulting from tensioning of the mesh drive the host response towards one direction or the other. Based on the solid foundation of scientific knowledge acquired through this proposal, we anticipate the future development of meshes that confer minimal risk, thereby improving the quality of life for the millions of potentially affected women and their families worldwide.

Agency
National Institute of Health (NIH)
Institute
Eunice Kennedy Shriver National Institute of Child Health & Human Development (NICHD)
Type
Research Project (R01)
Project #
1R01HD083383-01A1
Application #
9030077
Study Section
Bioengineering, Technology and Surgical Sciences Study Section (BTSS)
Program Officer
Halvorson, Lisa M
Project Start
2016-01-15
Project End
2020-12-31
Budget Start
2016-01-15
Budget End
2016-12-31
Support Year
1
Fiscal Year
2016
Total Cost
$535,699
Indirect Cost
$130,002
Name
Magee-Women's Research Institute and Foundation
Department
Type
DUNS #
119132785
City
Pittsburgh
State
PA
Country
United States
Zip Code
15213
Tennyson, Lauren; Rytel, Matthew; Palcsey, Stacy et al. (2018) Characterization of the T Cell Response to Polypropylene Mesh in Women with Complications. Am J Obstet Gynecol :
Knight, Katrina M; Moalli, Pamela A; Abramowitch, Steven D (2018) Preventing Mesh Pore Collapse by Designing Mesh Pores With Auxetic Geometries: A Comprehensive Evaluation Via Computational Modeling. J Biomech Eng 140:
Easley, Deanna C; Abramowitch, Steven D; Moalli, Pamela A (2017) Female pelvic floor biomechanics: bridging the gap. Curr Opin Urol 27:262-267
Liang, Rui; Knight, Katrina; Abramowitch, Steve et al. (2016) Exploring the basic science of prolapse meshes. Curr Opin Obstet Gynecol 28:413-9
Barone, William R; Moalli, Pamela A; Abramowitch, Steven D (2016) Textile properties of synthetic prolapse mesh in response to uniaxial loading. Am J Obstet Gynecol 215:326.e1-9
Nolfi, Alexis L; Brown, Bryan N; Liang, Rui et al. (2016) Host response to synthetic mesh in women with mesh complications. Am J Obstet Gynecol 215:206.e1-8
Barone, William R; Amini, Rouzbeh; Maiti, Spandan et al. (2015) The impact of boundary conditions on surface curvature of polypropylene mesh in response to uniaxial loading. J Biomech 48:1566-74