Tissue engineering (TE) offers the potential to create replacement heart valves which have the potential for growth and remodeling, overcoming the limitations of current heart valve devices. Using autologous cells and biodegradable polymers, TE heart valves (TEHV) have been fabricated and have functioned in the pulmonary circulation of growing lambs for up to four months. Despite these promising results, significant questions remain. For example, the role of initial scaffold structure and mechanical properties to guide the development of optimal extra- cellular matrix (ECM) structure and strength are largely unexplored. While detailed biomechanical investigations of the in-vitro incubation process could shed much light on optimizing TEHV designs, little work has been conducted to date. Finally, our understanding of the structure-strength relations in native pulmonary valve (PV), which serves as the ultimate design paradigm, is profoundly incomplete. Our long-term goal is to develop a rigorous quantitative understanding of the biomechanical events that occur during in-vivo TEHV remodeling, and to use this knowledge to develop functionally equivalent TEHV designs. By functional equivalent we refer to the fact we aim to develop an engineered tissue that can perform an equivalent physiologic function (e.g. have requisite mechanical properties and durability) without having to precisely reproduce tri-layer cuspal structure. Prior to undertaking comprehensive in-vivo studies, we believe that detailed knowledge of the factors necessary for optimizing TEHV structure and biomechanics during in-vitro incubation must first be established. We hypothesize that precise control of 3D scaffold structure, initial scaffold mechanical properties and biodegradation rates, and well- controlled hemodynamic loading conditions can be used to optimize TEHV designs to duplicate native PV function. In addition, the structure-strength relations of the native pulmonic valve will be rigorously established in order to establish the TEHV design functional endpoint. We will explore our hypotheses with the following specific aims: 1) Quantify the shape of the ovine pulmonary outflow track and determine the mechanics of the native ovine PV cusp. 2) Quantify how initial scaffold structure, composition, degradation rates, and mechanical properties can be exploited to optimize the resultant engineered heart valve tissue. 3) Perform in-vitro evaluation of TEHV fabricated using optimal scaffold designs and 3D guided RV outflow track geometry using novel bioreactor loop imaging system.

Agency
National Institute of Health (NIH)
Institute
National Heart, Lung, and Blood Institute (NHLBI)
Type
Research Project (R01)
Project #
5R01HL068816-03
Application #
6717649
Study Section
Surgery and Bioengineering Study Section (SB)
Program Officer
Lundberg, Martha
Project Start
2002-03-01
Project End
2006-02-28
Budget Start
2004-03-01
Budget End
2006-02-28
Support Year
3
Fiscal Year
2004
Total Cost
$325,628
Indirect Cost
Name
University of Pittsburgh
Department
Biomedical Engineering
Type
Schools of Engineering
DUNS #
004514360
City
Pittsburgh
State
PA
Country
United States
Zip Code
15213
Sakamoto, Yusuke; Buchanan, Rachel M; Sanchez-Adams, Johannah et al. (2017) On the Functional Role of Valve Interstitial Cell Stress Fibers: A Continuum Modeling Approach. J Biomech Eng 139:
Rego, Bruno V; Sacks, Michael S (2017) A functionally graded material model for the transmural stress distribution of the aortic valve leaflet. J Biomech 54:88-95
Soares, João S; Zhang, Will; Sacks, Michael S (2017) A mathematical model for the determination of forming tissue moduli in needled-nonwoven scaffolds. Acta Biomater 51:220-236
Soares, Joao S; Feaver, Kristen R; Zhang, Will et al. (2016) Biomechanical Behavior of Bioprosthetic Heart Valve Heterograft Tissues: Characterization, Simulation, and Performance. Cardiovasc Eng Technol 7:309-351
Soares, Joao S; Sacks, Michael S (2016) A triphasic constrained mixture model of engineered tissue formation under in vitro dynamic mechanical conditioning. Biomech Model Mechanobiol 15:293-316
Sakamoto, Yusuke; Buchanan, Rachel M; Sacks, Michael S (2016) On intrinsic stress fiber contractile forces in semilunar heart valve interstitial cells using a continuum mixture model. J Mech Behav Biomed Mater 54:244-58
D'Amore, Antonio; Soares, Joao S; Stella, John A et al. (2016) Large strain stimulation promotes extracellular matrix production and stiffness in an elastomeric scaffold model. J Mech Behav Biomed Mater 62:619-635
Hobson, Christopher M; Amoroso, Nicholas J; Amini, Rouzbeh et al. (2015) Fabrication of elastomeric scaffolds with curvilinear fibrous structures for heart valve leaflet engineering. J Biomed Mater Res A 103:3101-6
Carleton, James B; D'Amore, Antonio; Feaver, Kristen R et al. (2015) Geometric characterization and simulation of planar layered elastomeric fibrous biomaterials. Acta Biomater 12:93-101
D'Amore, Antonio; Amoroso, Nicholas; Gottardi, Riccardo et al. (2014) From single fiber to macro-level mechanics: A structural finite-element model for elastomeric fibrous biomaterials. J Mech Behav Biomed Mater 39:146-61

Showing the most recent 10 out of 53 publications