In 2012 and 2013 we made two advances. The first is to create the first hard x-ray gratings of 200 nm period that can be used to construct a highly sensitive x-ray phase contrast imaging device; the second is to develop the second generation gratings of higher quality and much reduced cost for use in bench-top systems. The first prototype gratings were sufficient for a prototype imaging system to be built and tested at a synchrotron beamline in Argonne National Laboratory. The second generation gratings came online in 2013 which enabled a benchtop imaging system at NIH. In 2014 a third generation of gratings were made which enlarged the horizontal field of view by two fold and doubled the dose efficiency of the imaging device. Current work is on increasing the size of the gratings and expanding to two-dimensional gratings.

Project Start
Project End
Budget Start
Budget End
Support Year
3
Fiscal Year
2015
Total Cost
Indirect Cost
Name
U.S. National Heart Lung and Blood Inst
Department
Type
DUNS #
City
State
Country
Zip Code
Mirzaeimoghri, Mona; Morales Martinez, Alejandro; Panna, Alireza et al. (2018) Nano-printed miniature compound refractive lens for desktop hard x-ray microscopy. PLoS One 13:e0203319
Miao, Houxun; Chen, Lei; Mirzaeimoghri, Mona et al. (2016) Cryogenic Etching of High Aspect Ratio 400 nm Pitch Silicon Gratings. J Microelectromech Syst 25:963-967
Znati, Sami A; Chedid, Nicholas; Miao, Houxun et al. (2015) Electrodeposition of Gold to Conformally Fill High Aspect Ratio Nanometric Silicon Grating Trenches: A Comparison of Pulsed and Direct Current Protocols. J Surf Eng Mater Adv Technol 5:207-213
Miao, Houxun; Gomella, Andrew A; Chedid, Nicholas et al. (2014) Fabrication of 200 nm period hard X-ray phase gratings. Nano Lett 14:3453-8
Wen, Han; Wolfe, Douglas E; Gomella, Andrew A et al. (2013) Interferometric hard x-ray phase contrast imaging at 204 nm grating period. Rev Sci Instrum 84:013706