Several new technologies have been developed from our work over the last couple of years. In a collaboration with GATAN Inc., we reported the development of a novel, multi-specimen imaging system for high-throughput transmission electron microscopy that circumvents time-consuming steps involved in manual specimen loading. This cartridge-based loading system, called the Gatling, permits the sequential examination of as many as 100 specimens in the microscope for room temperature electron microscopy using mechanisms for rapid and automated specimen exchange. This is now available commercially under the trade name Select 100. We anticipate that the availability of this accessory will greatly accelerate the speed of data acquisition for a variety of applications in biology, materials science and nanotechnology that require rapid screening and image analysis of multiple specimens. We have developed a complete framework for alignment, classification, and averaging of volumes derived by electron tomography that is computationally efficient and effectively accounts for the missing wedge that is inherent to limited angle electron tomography. Modeling the missing data as a multiplying mask in reciprocal space we have shown that the effect of the missing wedge can be accounted for seamlessly in all alignment and classification operations. We solve the alignment problem using the convolution theorem in harmonic analysis, thus eliminating the need for approaches that require exhaustive angular search, and adopt an iterative approach to alignment and classification that does not require the use of external references. We also demonstrated that our method could be successfully applied for 3D classification and averaging of phantom volumes as well as experimentally obtained tomograms of GroEL where the outcomes of the analysis can be quantitatively compared against the expected results. The development of these tools proved to be critical for our successful effort in determining the structure of trimeric HIV-1 envelope glycoproteins. Another area of focus has been on image processing and segmentation. Previous studies using nonlinear anisotropic methods, wavelet based methods and filtering have already demonstrated the value of image denoising in various 2D and 3D datasets. The existing methods usually consider clean data (or assume that clean data is available) and artificially add different types of noise to the clean data and then denoise the noisy data assuming that the statistics of noise is known using various algorithms. We have investigated the use of transform-domain denoising techniques and feature extraction to improve quantitative interpretation of cryo electron tomograms of viruses and cells. In our approach, we have used four metrics for analysis including the Kullback-Leibler (KL) distance based GOF test, Fourier ring correlation and single-image SNR to iteratively obtain the optimal denoising algorithm for a given 3D volume. Using these methods, we showed that denoising, when used with care is an enormously powerful tool for the automated interpretation of complex 3D data sets at high throughput. In continued developments for automated image analysis, we have developed a machine-learning tool for automatic texton-based joint classification and segmentation of mitochondria in MNT-1 cells imaged using ion-abrasion scanning electron microscopy (IA-SEM). For diagnosing signatures that may be unique to cellular states, automatic tools with minimal user intervention need to be developed for high-throughput data mining and analysis of these large volume data sets (typically 2GB/cell). Challenges for developing such a tool in 3D electron microscopy arise in particular due to low contrast and low signal-to-noise ratios (SNR). Our approach is based on block-wise classification of images into a trained list of regions. Classification is performed using a k-nearest neighbor (k-NN) classifier, support vector machines (SVMs), adaptive boosting (AdaBoost) and histogram matching using an NN classifier. In addition, we study the computational complexity vs. segmentation accuracy tradeoff of these classifiers. Segmentation results demonstrate that our approach using minimal training data performs close to semi-automatic methods using the variational level-set method and manual segmentation by an experienced user. We apply the method to investigate quantitative parameters such as volume of the cytoplasm occupied by mitochondria, differences between the surface area of inner and outer membranes and mean mitochondrial width that are representative quantities that may have relevance to distinguishing cancer cells from normal cells. Chemical definition of complex protein assemblies is integral to interpreting 3D structure. We have explored a general approach for the determination of absolute amounts and the relative stoichiometry of proteins in a mixture using fluorescence and mass spectrometry. We engineered a gene to express green fluorescent protein (GFP) with a synthetic fusion protein (GABGFP) in Escherichia coli to function as a spectroscopic standard for the quantification of an analogous stable isotope-labeled, non-fluorescent fusion protein (GAB*) and for the quantification and stoichiometric analysis of purified transducin, a heterotrimeric G-protein complex. Using our approach, the stoichiometry of the three transducin subunits was measured to be 1:1.1:1.15 over a 5-fold range of labeled internal standard with a relative standard deviation of 9%. Fusing a unique genetically coded spectroscopic signal element with concatenated proteotypic peptides provides a powerful method to accurately quantify and determine the relative stoichiometry of multiple proteins present in complexes or mixtures that cannot be readily assessed using classical gravimetric, enzymatic, or antibody-based technologies. Over the last year, we also took delivery of the first FEI Titan Krios automated electron microscope installed in the US. The work on this microscope has been conducted under the auspices of a collaboration between NCI and FEI Company aimed at advancing the throughput, level of automation and resolution of 3D electron microscopy. This microscope is integral and essential to our ongoing efforts at determining the structure of HIV envelope glycoproteins and structure of the bacterial apparatus for chemotaxis.
| Bartesaghi, Alberto; Aguerrebere, Cecilia; Falconieri, Veronica et al. (2018) Atomic Resolution Cryo-EM Structure of ?-Galactosidase. Structure 26:848-856.e3 |
| Cheng, Hsueh-Chien; Cardone, Antonio; Jain, Somay et al. (2018) Deep-learning-assisted Volume Visualization. IEEE Trans Vis Comput Graph : |
| Patwardhan, Ardan; Brandt, Robert; Butcher, Sarah J et al. (2017) Building bridges between cellular and molecular structural biology. Elife 6: |
| Guo, Tai Wei; Bartesaghi, Alberto; Yang, Hui et al. (2017) Cryo-EM Structures Reveal Mechanism and Inhibition of DNA Targeting by a CRISPR-Cas Surveillance Complex. Cell 171:414-426.e12 |
| Merk, Alan; Bartesaghi, Alberto; Banerjee, Soojay et al. (2016) Breaking Cryo-EM Resolution Barriers to Facilitate Drug Discovery. Cell 165:1698-1707 |
| Ognjenovi?, Jana; Wu, Jiang; Matthies, Doreen et al. (2016) The crystal structure of human GlnRS provides basis for the development of neurological disorders. Nucleic Acids Res 44:3420-31 |
| Banerjee, Soojay; Bartesaghi, Alberto; Merk, Alan et al. (2016) 2.3 Å resolution cryo-EM structure of human p97 and mechanism of allosteric inhibition. Science 351:871-5 |
| Borgnia, Mario J; Banerjee, Soojay; Merk, Alan et al. (2016) Using Cryo-EM to Map Small Ligands on Dynamic Metabolic Enzymes: Studies with Glutamate Dehydrogenase. Mol Pharmacol 89:645-51 |
| Subramaniam, Sriram; Kühlbrandt, Werner; Henderson, Richard (2016) CryoEM at IUCrJ: a new era. IUCrJ 3:3-7 |
| Puppala, Anupama K; French, Rachel L; Matthies, Doreen et al. (2016) Structural basis for early-onset neurological disorders caused by mutations in human selenocysteine synthase. Sci Rep 6:32563 |
Showing the most recent 10 out of 52 publications
