Emerging dental CAD/CAM systems provide a powerful technology for rapid fabrication of quality restorations from ceramics. However, the clinical performance of this brittle class of materials is strongly influenced by surface and subsurface defects produced during fabrication. In the clinical context, defects from machining operations (as well as those from contact fatigue and wear) can lead to premature clinical failures. The overall objective of Project 1 is to establish the relationship between intrinsic microstructural characteristics and machining parameters and environment on surface integrity (smoothness as well as surface and subsurface damage) of ceramics for dental restorations. The objective of this project will be accomplished through the six specific aims.
Aims 1 -3 will focus directly on surface integrity, quantifying surface integrity as a function of machining parameters (Aim 1), machining environments (Aim 2), and materials microstructure (Aim 3).
Aim 4 is to elucidate the mechanisms of material removal during machining of ceramic materials as a function of material microstructure, providing a knowledge base for future investigations.
Aim 5 will address the problem of tool wear, quantifying tool wear as a function of machining parameters, machining environment, and ceramic microstructure. An economic evaluation of machining operations for dental ceramics is determined in Aim 6. At the conclusion of this project, valuable information will have been obtained which will impact long-term clinical performance of machined ceramic restorations. This information is increasingly critical as the production of high quality, cost effective, ceramic restorations with a high probability of clinical success become more and more important as replacements for metal restorations are being sought and improved esthetics are being demanded by dental patients.

Agency
National Institute of Health (NIH)
Institute
National Institute of Dental & Craniofacial Research (NIDCR)
Type
Research Program Projects (P01)
Project #
1P01DE010976-01A1
Application #
3732672
Study Section
Project Start
Project End
Budget Start
Budget End
Support Year
1
Fiscal Year
1995
Total Cost
Indirect Cost
Name
University of Medicine & Dentistry of NJ
Department
Type
DUNS #
605799469
City
Newark
State
NJ
Country
United States
Zip Code
07107
Yin, Ling (2012) Property-process relations in simulated clinical abrasive adjusting of dental ceramics. J Mech Behav Biomed Mater 16:55-65
Silva, N R F A; Bonfante, E A; Rafferty, B T et al. (2011) Modified Y-TZP core design improves all-ceramic crown reliability. J Dent Res 90:104-8
Rafferty, Brian T; Janal, Malvin N; Zavanelli, Ricardo A et al. (2010) Design features of a three-dimensional molar crown and related maximum principal stress. A finite element model study. Dent Mater 26:156-63
Bonfante, Estevam A; Sailer, Irena; Silva, Nelson R F A et al. (2010) Failure modes of Y-TZP crowns at different cusp inclines. J Dent 38:707-12
Guess, P C; Zhang, Y; Kim, J-W et al. (2010) Damage and reliability of Y-TZP after cementation surface treatment. J Dent Res 89:592-6
Bonfante, Estevam A; da Silva, Nelson R F A; Coelho, Paulo G et al. (2009) Effect of framework design on crown failure. Eur J Oral Sci 117:194-9
Coelho, P G; Silva, N R; Bonfante, E A et al. (2009) Fatigue testing of two porcelain-zirconia all-ceramic crown systems. Dent Mater 25:1122-7
Rekow, E Dianne; Zhang, Guangming; Thompson, Van et al. (2009) Effects of geometry on fracture initiation and propagation in all-ceramic crowns. J Biomed Mater Res B Appl Biomater 88:436-46
Coelho, Paulo G; Silva, Nelson R; Thompson, Van P et al. (2009) Effect of proximal wall height on all-ceramic crown core stress distribution: a finite element analysis study. Int J Prosthodont 22:78-86
Zhang, Yu; Kim, Jae-Won; Bhowmick, Sanjit et al. (2009) Competition of fracture mechanisms in monolithic dental ceramics: flat model systems. J Biomed Mater Res B Appl Biomater 88:402-11

Showing the most recent 10 out of 54 publications