This subproject is one of many research subprojects utilizing the resources provided by a Center grant funded by NIH/NCRR. Primary support for the subproject and the subproject's principal investigator may have been provided by other sources, including other NIH sources. The Total Cost listed for the subproject likely represents the estimated amount of Center infrastructure utilized by the subproject, not direct funding provided by the NCRR grant to the subproject or subproject staff. Electron tomography (ET) of plastic sections is limited in quality by the low signal-to-noise ratio (SNR) of the data. This problem is even greater for ET of frozen-hydrated samples (cryo ET) because they have low contrast and are very sensitive to damage by the electron beam. SNR for all EM samples is typically a decreasing function of resolution one is trying to achieve, severely limiting the amount of structural detail that is accessible in a tomogram. For specimens containing multiple copies of a given structure, we have developed an algorithm to improve the SNR by estimating the true 3D structure that is present in the cell, based on the images of multiple copies of the same structure that are often visible in a tomogram. Our technique builds on the approach developed for single-particle electron microscopy, with the primary difference that alignment and averaging occur over the 3D tomographic volume. The advantage of this approach is that the structure of interest can be studied in situ instead of having to be isolated from its cellular context. Our algorithm for estimating the true 3D particle structure is as follows. Using manually selected particle locations within the tomogram, a sub volume containing each particle is excised and then aligned rotationally by explicitly comparing each sub volume with a reference volume over a range of discrete Euler rotations. Sub volume comparison is typically computed using a Fourier domain local correlation coefficient sequence function, which also provides the optimal translational shift for each rotation. The reference volume can be chosen from the collection of particles, or an unbiased reference can be generated by a pair-wise binary tree alignment of a subset of particles. This alignment procedure is typically iterated, reducing the rotational search space and granularity, and allowing an update of the reference volume at each iteration. Once we have rotation and translation estimates for each particle we estimate the particle volume by averaging the aligned sub volumes. We compensate for the wedge of missing data that is characteristic of single-axis tilting ET by accounting for the Fourier component contribution, or lack thereof, from each particle as it is transformed into alignment with the reference. Qualitatively, our particle estimation algorithm allows us to visualize structural details that are not visible in the original tomogram. Quantitatively, the spectral-signal-to-noise ratio measurements show SNR improvements close to that expected for the number of particles averaged. During the recent past, we have added 2 functions to this software: the ability to average particles from multiple tomograms and the ability to distribute the search for optimal alignment across a network of computers. Experiments have shown that the missing wedge is better accounted for in the final average with the result that particles with more orientational variations can be added. The computation time has also been cut from a few days to a few hours.

Agency
National Institute of Health (NIH)
Institute
National Center for Research Resources (NCRR)
Type
Biotechnology Resource Grants (P41)
Project #
5P41RR000592-41
Application #
8362534
Study Section
Special Emphasis Panel (ZRG1-CB-J (40))
Project Start
2011-05-01
Project End
2012-04-30
Budget Start
2011-05-01
Budget End
2012-04-30
Support Year
41
Fiscal Year
2011
Total Cost
$53,189
Indirect Cost
Name
University of Colorado at Boulder
Department
Biochemistry
Type
Schools of Arts and Sciences
DUNS #
007431505
City
Boulder
State
CO
Country
United States
Zip Code
80309
Giddings Jr, Thomas H; Morphew, Mary K; McIntosh, J Richard (2017) Preparing Fission Yeast for Electron Microscopy. Cold Spring Harb Protoc 2017:
Zhao, Xiaowei; Schwartz, Cindi L; Pierson, Jason et al. (2017) Three-Dimensional Structure of the Ultraoligotrophic Marine Bacterium ""Candidatus Pelagibacter ubique"". Appl Environ Microbiol 83:
Brown, Joanna R; Schwartz, Cindi L; Heumann, John M et al. (2016) A detailed look at the cytoskeletal architecture of the Giardia lamblia ventral disc. J Struct Biol 194:38-48
Saheki, Yasunori; Bian, Xin; Schauder, Curtis M et al. (2016) Control of plasma membrane lipid homeostasis by the extended synaptotagmins. Nat Cell Biol 18:504-15
Höög, Johanna L; Lacomble, Sylvain; Bouchet-Marquis, Cedric et al. (2016) 3D Architecture of the Trypanosoma brucei Flagella Connector, a Mobile Transmembrane Junction. PLoS Negl Trop Dis 10:e0004312
Park, J Genevieve; Palmer, Amy E (2015) Properties and use of genetically encoded FRET sensors for cytosolic and organellar Ca2+ measurements. Cold Spring Harb Protoc 2015:pdb.top066043
McCoy, Kelsey M; Tubman, Emily S; Claas, Allison et al. (2015) Physical limits on kinesin-5-mediated chromosome congression in the smallest mitotic spindles. Mol Biol Cell 26:3999-4014
Höög, Johanna L; Lötvall, Jan (2015) Diversity of extracellular vesicles in human ejaculates revealed by cryo-electron microscopy. J Extracell Vesicles 4:28680
Marc, Robert E; Anderson, James R; Jones, Bryan W et al. (2014) The AII amacrine cell connectome: a dense network hub. Front Neural Circuits 8:104
Weber, Britta; Tranfield, Erin M; Höög, Johanna L et al. (2014) Automated stitching of microtubule centerlines across serial electron tomograms. PLoS One 9:e113222

Showing the most recent 10 out of 84 publications