The continued development of new tools and techniques that improve sensitivity, selectivity, speed and throughput in biological analysis, while reducing the cost per assay, will be critical in clinical diagnosis, medical research, and other disciplines in the life sciences. Micromachining methods have the potential to enable the construction of low-cost, yet sophisticated microfluidic systems for the analysis of complex protein mixtures. Herein, we propose to develop a phase-changing sacrificial layer (PCSL) microfabrication approach and polymer surface modification methods to create inexpensive microfluidic devices that can improve the detection and quantification of alpha-fetoprotein (AFP), a cancer and fetal wellness marker, in blood and urine. The objectives of this proposal are four-fold. First, we will generalize the PCSL solvent bonding fabrication technique and atom-transfer radical polymerization surface modification methods to a range of polymer microfluidic systems for protein analysis. Second, we plan to evaluate the PCSL solvent bonding approach for making complex, multilayer microfluidic arrays that facilitate the integration of sample processing steps. Third, we will develop these fabrication techniques to enable the incorporation of immunoaffinity purification systems and protein sample preconcentrators for use in enhancing detection in microchip capillary electrophoresis. Fourth, we will utilize the tools from the first three objectives to make microdevices that extract and preconcentrate lower-abundance proteins such as AFP from biological mixtures; we will then evaluate these microsystems for the determination of AFP levels in blood and urine. Importantly, while the studies in this proposal are directed toward the development of miniaturized assays for AFP, these same fabrication and analysis procedures can be generalized in a straightforward manner to allow the rapid quantification of other lower-abundance cancer and disease biomarkers. Thus, PCSL techniques and polymer surface derivatization methods should provide a broadly applicable microchip platform for the electrophoretic analysis and quantification of proteins or other biomolecules in humans. ? ? ?

Agency
National Institute of Health (NIH)
Institute
National Institute of Biomedical Imaging and Bioengineering (NIBIB)
Type
Research Project (R01)
Project #
1R01EB006124-01
Application #
7079019
Study Section
Enabling Bioanalytical and Biophysical Technologies Study Section (EBT)
Program Officer
Korte, Brenda
Project Start
2006-04-01
Project End
2010-01-31
Budget Start
2006-04-01
Budget End
2007-01-31
Support Year
1
Fiscal Year
2006
Total Cost
$270,000
Indirect Cost
Name
Brigham Young University
Department
Chemistry
Type
Schools of Arts and Sciences
DUNS #
009094012
City
Provo
State
UT
Country
United States
Zip Code
84602
Nielsen, Anna V; Nielsen, Jacob B; Sonker, Mukul et al. (2018) Microchip electrophoresis separation of a panel of preterm birth biomarkers. Electrophoresis 39:2300-2307
Beauchamp, Michael J; Gong, Hua; Woolley, Adam T et al. (2018) 3D Printed Microfluidic Features Using Dose Control in X, Y, and Z Dimensions. Micromachines (Basel) 9:
Gong, Hua; Woolley, Adam T; Nordin, Gregory P (2018) 3D printed high density, reversible, chip-to-chip microfluidic interconnects. Lab Chip 18:639-647
Parker, Ellen K; Nielsen, Anna V; Beauchamp, Michael J et al. (2018) 3D printed microfluidic devices with immunoaffinity monoliths for extraction of preterm birth biomarkers. Anal Bioanal Chem :
Sahore, Vishal; Sonker, Mukul; Nielsen, Anna V et al. (2018) Automated microfluidic devices integrating solid-phase extraction, fluorescent labeling, and microchip electrophoresis for preterm birth biomarker analysis. Anal Bioanal Chem 410:933-941
Sonker, Mukul; Sahore, Vishal; Woolley, Adam T (2017) Recent advances in microfluidic sample preparation and separation techniques for molecular biomarker analysis: A critical review. Anal Chim Acta 986:1-11
Beauchamp, Michael J; Nordin, Gregory P; Woolley, Adam T (2017) Moving from millifluidic to truly microfluidic sub-100-?m cross-section 3D printed devices. Anal Bioanal Chem 409:4311-4319
Sonker, Mukul; Knob, Radim; Sahore, Vishal et al. (2017) Integrated electrokinetically driven microfluidic devices with pH-mediated solid-phase extraction coupled to microchip electrophoresis for preterm birth biomarkers. Electrophoresis 38:1743-1754
Gong, Hua; Bickham, Bryce P; Woolley, Adam T et al. (2017) Custom 3D printer and resin for 18 ?m × 20 ?m microfluidic flow channels. Lab Chip 17:2899-2909
Sonker, Mukul; Parker, Ellen K; Nielsen, Anna V et al. (2017) Electrokinetically operated microfluidic devices for integrated immunoaffinity monolith extraction and electrophoretic separation of preterm birth biomarkers. Analyst 143:224-231

Showing the most recent 10 out of 44 publications