The concept and practice of seeding cells onto degradable polymer scaffolds, such as poly(lactic acid) (PLA) or poly (glycolic acid) (PGA), in vitro followed by eventual in vivo implantation has become an important methodology in tissue engineering. These scaffolds provide structural support for the cells until they develop their own extracellular matrix, but scaffold mechanical properties have yet to be specifically designed to provide an environment that will match that of the native tissue. The specific interest of this project is the engineering of cardiovascular tissues. In the investigators' experiences with existing PLA or PGA tubular and valvular leaflet scaffolds, it has been difficult to sew them into the native tissue, bend them to fit a desired or required conformation within the animal, or replace all three pulmonary valve leaflets without leading to unacceptable valvular stenosis. The investigators' goals are to develop the next generation of tissue engineering polymer scaffolds with mechanical properties (e.g. elasticity) that closely model those of the native tissue (pulmonary valve leaflets, arteries) and to investigate the influence of such an environment on cell proliferation, tissue formation, and function of engineered tissues in vivo. Their hypothesis is that significant advances in tissue engineering may be realized if the biomaterials to be used as scaffolds can be specifically designed to resemble the mechanical properties of the native tissue in question. Accordingly, the Specific Aims are: 1) Synthesis and characterization of elastic, degradable polymers with appropriate mechanical properties for use as cardiovascular tissue engineering scaffolds; 2) Test the degradation profiles of the new polymers and monitor the changes in mechanical properties over time; 3) Test the polymer-cell compatibilities and interactions (attachment and spreading) on polymer films using appropriate cell types (e.g. endothelial cells, smooth muscle cells, fibroblasts). Cells will be provided by Dr. Mayer at Children's Hospital; 4) Select best candidates based on Aims 1-3, then design and prepare scaffolds in the shapes of tubes for blood vessels and leaflets or whole valves for heart valves; 5) Carry out in vitro cell seeding studies to determine the influence of polymer properties and bioreactor conditions on cell differentiation, proliferation, and tissue formation in conjunction with Drs. Vacanti, Bischoff, and Roth at Children's Hospital; 6) Implantation of cell-scaffold devices at the appropriate time frame based on the findings of Aim 5 in small animal models (to be carried out by Drs. Mayer and Vacanti at Children's Hospital).

Agency
National Institute of Health (NIH)
Institute
National Heart, Lung, and Blood Institute (NHLBI)
Type
Research Project (R01)
Project #
5R01HL060435-03
Application #
6184493
Study Section
Special Emphasis Panel (ZHL1-CSR-F (M1))
Project Start
1998-07-10
Project End
2003-06-30
Budget Start
2000-07-01
Budget End
2001-06-30
Support Year
3
Fiscal Year
2000
Total Cost
$408,640
Indirect Cost
Name
Massachusetts Institute of Technology
Department
Engineering (All Types)
Type
Schools of Engineering
DUNS #
City
Cambridge
State
MA
Country
United States
Zip Code
02139
Langer, Robert; Vacanti, Joseph (2016) Advances in tissue engineering. J Pediatr Surg 51:8-12
Saigal, Rajiv; Cimetta, Elisa; Tandon, Nina et al. (2013) Electrical stimulation via a biocompatible conductive polymer directs retinal progenitor cell differentiation. Conf Proc IEEE Eng Med Biol Soc 2013:1627-31
Zoldan, Janet; Karagiannis, Emmanouil D; Lee, Christopher Y et al. (2011) The influence of scaffold elasticity on germ layer specification of human embryonic stem cells. Biomaterials 32:9612-21
Kraehenbuehl, Thomas P; Langer, Robert; Ferreira, Lino S (2011) Three-dimensional biomaterials for the study of human pluripotent stem cells. Nat Methods 8:731-6
Kraehenbuehl, Thomas P; Ferreira, Lino S; Hayward, Alison M et al. (2011) Human embryonic stem cell-derived microvascular grafts for cardiac tissue preservation after myocardial infarction. Biomaterials 32:1102-9
Ghosh, Fredrik; Neeley, William L; Arnér, Karin et al. (2011) Selective removal of photoreceptor cells in vivo using the biodegradable elastomer poly(glycerol sebacate). Tissue Eng Part A 17:1675-82
Levenberg, Shulamit; Ferreira, Lino S; Chen-Konak, Limor et al. (2010) Isolation, differentiation and characterization of vascular cells derived from human embryonic stem cells. Nat Protoc 5:1115-26
Pritchard, Christopher D; Arnér, Karin M; Langer, Robert S et al. (2010) Retinal transplantation using surface modified poly(glycerol-co-sebacic acid) membranes. Biomaterials 31:7978-84
Pritchard, Christopher D; Arnér, Karin M; Neal, Rebekah A et al. (2010) The use of surface modified poly(glycerol-co-sebacic acid) in retinal transplantation. Biomaterials 31:2153-62
Fisher, Omar Z; Khademhosseini, Ali; Langer, Robert et al. (2010) Bioinspired materials for controlling stem cell fate. Acc Chem Res 43:419-28

Showing the most recent 10 out of 56 publications