The development of approaches for multidimensional integration of functional electronic components with biological tissue and organs could have tremendous impact in regenerative medicine, smart prosthetics, and human-machine interfaces. However, current electronic devices and systems are inherently two dimensional and rigid, thus prohibiting seamless meshing with three-dimensional, soft biology. The ability to three-dimensionally interweave biological tissue with functional electronics could enable the creation of bionic organs for restoring impairments, or enhancing human functionalities over their natural limitations. Current electronics are inherently two-dimensional, preventing seamless integration with biology, as the processes and materials used to create synthetic tissue constructs vs. conventional electronic devices are very different. Here, we present a novel strategy for overcoming these difficulties via additive manufacturing of biological cells with various classes of functional electronic nanomaterials. Recently, we have generated a functional bionic ear via 3D printing of a cell-seeded hydrogel matrix in the precise anatomic geometry of a human ear, along with an intertwined conducting polymer consisting of infused silver nanoparticles. This allowed for the in vitro culturing of cartilage tissue around an inductive coil antenna in the ear, which subsequently connects to cochlea-shaped electrodes. The printed ear exhibits enhanced auditory sensing for radio frequency reception, and complementary left and right ears can listen to stereo music. Here, we propose extending this approach to new functionalities - such as ultrasonic acoustic reception and vasculature - and bionic organs, including bionic eyes and a bionic nose. Overall, our approach presents a disruptive and paradigm-shifting new method to intricately merge biology and electronics via 3D printing. The work outlined here thus constitutes a novel, highly interdisciplinary investigation to addressing outstanding questions in the generation of bionic organs, and we anticipate that this work will represent a paradigm-shift in both tissue engineering, as well as 3D interweaving of functional electronics into biological systems.

Public Health Relevance

The development of tissues and organs which contain integrated electronic functionality could impact areas ranging from regenerative medicine, to providing humans with augmented capabilities. However, current electronic devices and systems are inherently two dimensional and rigid, thus prohibiting seamless meshing with three-dimensional, soft biology. Here, we propose the use of 3D printing to interlace biology with electronics to generate bionic organs.

Agency
National Institute of Health (NIH)
Institute
National Institute of Biomedical Imaging and Bioengineering (NIBIB)
Type
NIH Director’s New Innovator Awards (DP2)
Project #
4DP2EB020537-03
Application #
9459522
Study Section
Special Emphasis Panel (ZRG1)
Program Officer
Wolfson, Michael
Project Start
2015-07-01
Project End
2020-06-30
Budget Start
2019-07-01
Budget End
2020-06-30
Support Year
3
Fiscal Year
2019
Total Cost
Indirect Cost
Name
University of Minnesota Twin Cities
Department
Engineering (All Types)
Type
Biomed Engr/Col Engr/Engr Sta
DUNS #
555917996
City
Minneapolis
State
MN
Country
United States
Zip Code
55455
Qiu, Kaiyan; Haghiashtiani, Ghazaleh; McAlpine, Michael C (2018) 3D Printed Organ Models for Surgical Applications. Annu Rev Anal Chem (Palo Alto Calif) 11:287-306
Qiu, Kaiyan; Zhao, Zichen; Haghiashtiani, Ghazaleh et al. (2018) 3D Printed Organ Models with Physical Properties of Tissue and Integrated Sensors. Adv Mater Technol 3:
Zhu, Zhijie; Guo, Shuang-Zhuang; Hirdler, Tessa et al. (2018) 3D Printed Functional and Biological Materials on Moving Freeform Surfaces. Adv Mater 30:e1707495
Zhan, Li; Guo, Shuang-Zhuang; Song, Fayi et al. (2017) The Role of Nanoparticle Design in Determining Analytical Performance of Lateral Flow Immunoassays. Nano Lett 17:7207-7212
Guo, Shuang-Zhuang; Qiu, Kaiyan; Meng, Fanben et al. (2017) 3D Printed Stretchable Tactile Sensors. Adv Mater 29:
Kong, Yong Lin; Gupta, Maneesh K; Johnson, Blake N et al. (2016) 3D Printed Bionic Nanodevices. Nano Today 11:330-350
Gupta, Maneesh K; Meng, Fanben; Johnson, Blake N et al. (2015) 3D Printed Programmable Release Capsules. Nano Lett 15:5321-9