This project will study fifteen unilateral below-knee prosthesis users using six different prosthetic feet on five ramp surfaces (-10o, -5o, 0o, 5o, and 10o). Two of the six components are claimed to be adaptable to walking surface slopes. For each of these adaptable systems, two similar components will also be tested in an attempt to determine the effects of their approaches to adaptation on ramp walking. Each participant will use all components in a random order, making the study a randomized cross-over design. Measurements will focus on the effective torque experienced at the end of the residual limb socket, which should relate to pressures felt within the socket and required activation of muscles controlling the remaining knee. The torque versus angle characteristic at the ankle and the roll- over shape will also be measured to estimate the relative """"""""stiffness,"""""""" the effective alignment (set-point) for each step, and the energy requirements of a system that would mimic the able-bodied system. Self-reported effort and comfort associated with the use of each prosthetic foot on the ramps will also be collected from prosthesis users in the study. Data will also be collected on age-matched able- bodied persons for comparison of their ankle-foot biomechanics on the various ramp surfaces with those of the prosthetic ankle-foot systems.
Project Narrative This study is directly applicable to the VA Patient Care Mission because it will examine a feature (adaptability) that is thought to improve comfort and decrease effort of prosthesis users when walking on inclined and declined surfaces. Adaptability of a prosthetic ankle-foot system may allow users to participate in a larger number of activities, improving their quality of life. Information gathered from able-bodied persons walking on ramp surfaces will also assist in future designs of adaptable ankle-foot prostheses.
