Fractures of the proximal femur represent a national health problem of crisis proportions. More than 200,000 hip fractures occur annually, resulting in costs in excess of 7 billion dollars annually. While there is growing evidence that certain therapeutic measures such as estrogen replacement can help retard bone loss and thus reduce hip fractrure incidence, some treatment modalities are associated with significant risks. It becomes increasingly important, therefore, to identify those patients at risk of hip fracture so that appropriate therapy can be instituted. New diagnostic imaging modalities such as x-ray computed tomography (CT) could be employed for this purpose if appropriate tissue characterization procedures and biomechanical fracture risk predictors are developed. The goal of this research program is to develop verified biomechanical predictors of hip fracture risk which can be implemented on available CT scanners and used in the diagnosis and treatment of hip pathologies. To address this goal, we will demonstrate (as we have done in the spine) that accurate determination of femoral neck geometries, cortical thicknesses and trabecualr apparent densities can be obtained using quantitative x-ray computed tomography (QCT). We will then show (through finite element modeling studies, strain gage validation experiments and in vitro failure tests) that the QCT data can be used to predict failure loads. Parametric finite element studies will also be used to determine the most important biomechanical parameters (femoral geometry, bone loss, loading type) controlling spontaneous and traumatic fractures of the femoral neck. Prior to proposing future clinical trials of the resulting fractrure risk predictors, we will also address issues of accurate patient positioning and scan location and develop the appropriate analytic software for direct implementation of these methods on CT scanners.

Agency
National Institute of Health (NIH)
Institute
National Cancer Institute (NCI)
Type
Research Project (R01)
Project #
1R01CA041295-01A1
Application #
3181637
Study Section
Diagnostic Radiology Study Section (RNM)
Project Start
1986-08-01
Project End
1990-01-31
Budget Start
1986-08-01
Budget End
1988-01-31
Support Year
1
Fiscal Year
1986
Total Cost
Indirect Cost
Name
Beth Israel Deaconess Medical Center
Department
Type
DUNS #
076593722
City
Boston
State
MA
Country
United States
Zip Code
02215
Bouxsein, Mary L; Szulc, Pawel; Munoz, Fracoise et al. (2007) Contribution of trochanteric soft tissues to fall force estimates, the factor of risk, and prediction of hip fracture risk. J Bone Miner Res 22:825-31
Robinovitch, S N; Hsiao, E T; Sandler, R et al. (2000) Prevention of falls and fall-related fractures through biomechanics. Exerc Sport Sci Rev 28:74-9
Greenspan, S L; Myers, E R; Kiel, D P et al. (1998) Fall direction, bone mineral density, and function: risk factors for hip fracture in frail nursing home elderly. Am J Med 104:539-45
Robinovitch, S N; Hayes, W C; McMahon, T A (1997) Predicting the impact response of a nonlinear single-degree-of-freedom shock-absorbing system from the measured step response. J Biomech Eng 119:221-7
Hayes, W C; Myers, E R; Robinovitch, S N et al. (1996) Etiology and prevention of age-related hip fractures. Bone 18:77S-86S
Pinilla, T P; Boardman, K C; Bouxsein, M L et al. (1996) Impact direction from a fall influences the failure load of the proximal femur as much as age-related bone loss. Calcif Tissue Int 58:231-5
Ford, C M; Keaveny, T M; Hayes, W C (1996) The effect of impact direction on the structural capacity of the proximal femur during falls. J Bone Miner Res 11:377-83
van den Kroonenberg, A J; Hayes, W C; McMahon, T A (1996) Hip impact velocities and body configurations for voluntary falls from standing height. J Biomech 29:807-11
Courtney, A C; Wachtel, E F; Myers, E R et al. (1995) Age-related reductions in the strength of the femur tested in a fall-loading configuration. J Bone Joint Surg Am 77:387-95
van den Kroonenberg, A J; Hayes, W C; McMahon, T A (1995) Dynamic models for sideways falls from standing height. J Biomech Eng 117:309-18

Showing the most recent 10 out of 25 publications