The design and evaluation of advanced prosthetic fitting systems requires complex and comprehensive anthropometric data, analysis, and visualization methods. Point-to-point and contact casting measurement methods have been used by prosthetists for many decades. These measurement methods do not provide enough information on the shape, volume and tissue characteristics to allow modern CAD software programs to realistically model the residua for which the socket is being designed. Anatomic three-dimensional reconstruction of the residuum by 3-D Optical Surface and Spiral Computed Tomography (CT) imaging, unlike other 3-D scanning modalities, is capable of clearly delineating the complete surface geometry along with the soft tissue and hard tissue components of the patient's residuum. A true 3-D geometrical description, including the internal tissue characteristics, has therefore become available by noninvasive scanning with low radiation exposure. The goal of this proposal is to interface these modalities to build a finite element model to quantify the prosthetic fitting process. Phase I (measurement validation and development) involves the comparison of four types of measurement methods: the traditional contact method, 3Space hand held point digitizer, 3D Optical Surface digitizer, and Spiral CT volumetric scanner. The last two measurement means allow us to collect high resolution 3-D topological and volumetric data for validation using the 3Space digitizer. Phase II (solid model validation and development) will involve the use of 3D Optical Surface digitizer and spiral CT scanner geometry data to generate a mathematical complete solid model of the residuum with physical mass properties. Both volumetric and internal measurements will be performed on cadaver limbs to validate the solid model's internal and external geometry. With the inclusion of pressure testing (loading) and materials property information, a finite element model will be generated.

Agency
National Institute of Health (NIH)
Institute
Eunice Kennedy Shriver National Institute of Child Health & Human Development (NICHD)
Type
Research Project (R01)
Project #
5R01HD030169-02
Application #
2202511
Study Section
Special Emphasis Panel (SRC (S2))
Project Start
1992-09-30
Project End
1995-08-31
Budget Start
1993-09-01
Budget End
1995-08-31
Support Year
2
Fiscal Year
1993
Total Cost
Indirect Cost
Name
Washington University
Department
Radiation-Diagnostic/Oncology
Type
Schools of Medicine
DUNS #
062761671
City
Saint Louis
State
MO
Country
United States
Zip Code
63130
Madsen, M T; Haller, J; Commean, P K et al. (2000) A device for applying static loads to prosthetic limbs of transtibial amputees during spiral CT examination. J Rehabil Res Dev 37:383-7
Wang, G; Frei, T; Vannier, M W (2000) Fast iterative algorithm for metal artifact reduction in X-ray CT. Acad Radiol 7:607-14
Commean, P K; Brunsden, B S; Smith, K E et al. (1998) Below-knee residual limb shape change measurement and visualization. Arch Phys Med Rehabil 79:772-82
Commean, P K; Smith, K E; Vannier, M W et al. (1997) Finite element modeling and experimental verification of lower extremity shape change under load. J Biomech 30:531-6
Commean, P K; Smith, K E; Vannier, M W (1997) Lower extremity residual limb slippage within the prosthesis. Arch Phys Med Rehabil 78:476-85
Commean, P K; Smith, K E; Vannier, M W (1996) Design of a 3-D surface scanner for lower limb prosthetics: a technical note. J Rehabil Res Dev 33:267-78
Commean, P K; Smith, K E; Cheverud, J M et al. (1996) Precision of surface measurements for below-knee residua. Arch Phys Med Rehabil 77:477-86
Smith, K E; Commean, P K; Vannier, M W (1996) Residual-limb shape change: three-dimensional CT scan measurement and depiction in vivo. Radiology 200:843-50
Kohn, L A; Cheverud, J M; Bhatia, G et al. (1995) Anthropometric optical surface imaging system repeatability, precision, and validation. Ann Plast Surg 34:362-71
Smith, K E; Commean, P K; Bhatia, G et al. (1995) Validation of spiral CT and optical surface scanning for lower limb stump volumetry. Prosthet Orthot Int 19:97-107