Pressure injuries are a serious health care problem and affect millions of people. Most pressure injuries are avoidable with the application of best practices and with the use of appropriate technology. Support surfaces are a crucial component of any comprehensive prevention strategy. Decades of research have produced moderate and low levels of evidence upon which to base clinical decisions concerning how and when to apply support surfaces for prevention. This knowledge has been periodically assessed and assembled into clinical practice guidelines. There is good evidence that the combined group of active and reactive support surfaces is effective in preventing pressure injuries and that high-specification reactive foam surfaces are effective in preventing pressure injuries. But there is insufficient evidence that low air loss surfaces are more or less effective than other types of surfaces. Yet, low air loss surfaces are used for more than 17% of patients in acute care at high risk of developing pressure injuries. Our study is designed to determine if and when low air loss is effective in preventing pressure injuries, and what level of heat and moisture control performance is necessary for prevention effectiveness. The primary aim of the project is to compare the effectiveness of reactive support surfaces with low air loss to reactive support surfaces without low air loss in preventing pressure injuries for people with moisture risk factors in acute care. Support surfaces are currently marketed and identified by practitioners based on device features (e.g., low air loss, air fluidization, alternating pressure), categories (powered, non-powered, reactive, and active) and components (e.g., foam, gel, fluid). A WOCN developed selection algorithm specifies support surfaces based on categories and features. The critical performance characteristics of low air loss systems are moisture, humidity and temperature management. Preliminary work has revealed that these characteristics vary widely among different low air loss products. A secondary aim of the proposed study is to explore associations between support surface performance characteristics and pressure injury outcomes to identify which low air loss performance characteristics and what level of those performance characteristics are necessary for the technology to be effective. Successful completion of this project will fill a critical gap in evidence regarding the effectiveness of support surfaces with low air loss, and could influence a shift in the way support surfaces are characterized away from the current feature-based paradigm toward a more clinically relevant and generalizable performance-based paradigm.

Public Health Relevance

Pressure injuries are a serious health care problem that threatens the health and well-being of millions of people. Use of specialized support surfaces (e.g., mattress, mattress overlay) has been shown to prevent pressure injuries, but the effectiveness of specific features designed for management of tissue loads, microclimate, and/or other therapeutic functions is unknown. The proposed research aims to determine if low air loss, a commonly utilized support surface feature, is effective for preventing pressure injuries, and to identify which performance characteristics and what level of those performance characteristics are necessary for the technology to be effective.

Agency
National Institute of Health (NIH)
Institute
National Institute of Nursing Research (NINR)
Type
Research Project (R01)
Project #
5R01NR016952-03
Application #
9696009
Study Section
Nursing and Related Clinical Sciences Study Section (NRCS)
Program Officer
Yoon, Sung Sug
Project Start
2017-08-01
Project End
2021-05-31
Budget Start
2019-06-07
Budget End
2020-05-31
Support Year
3
Fiscal Year
2019
Total Cost
Indirect Cost
Name
University of Pittsburgh
Department
Physical Medicine & Rehab
Type
Sch Allied Health Professions
DUNS #
004514360
City
Pittsburgh
State
PA
Country
United States
Zip Code
15260