There has been tremendous recent progress in the area of wearable medical devices capable of monitoring heart conditions, activity levels, respiration rates, and many other physical parameters. However, further progress in this area has been hindered by: 1) large and rigid devices that are not anatomically compliant; and 2) the lack of chemical sensors. The objective of this collaborative project is to develop and demonstrate initial validity of a Flexible Epidermal Multimodal health Monitoring (FlexEM2) system for the simultaneous real- time measurement of multiple key metabolites (sub-dermal glucose, lactate), electrolytes (pH, Na+, Ca2+), electrophysiology (biopotentials - e.g., ECG), and physical parameters (respiration rate, skin temperature), all for use in health status and chronic disease monitoring applications. The combination of multiple sensing modalities into a single wearable platform can yield significant additional insights into the health and physiologica status of individuals compared to what is obtained by monitoring single physical variables alone. By integrating these biosensors on a flexible, epidermal-mounted temporary tattoo-like patch that interfaces directly with ultra-miniaturized wireless electronics, patients can use these devices in ambulatory, outpatient environments with minimal discomfort or obtrusiveness. As a low-cost printed platform that also leverages scaled semiconductor manufacturing, the developed FlexEM2 system can be employed for widespread use as a general diagnostic tool, for preventive healthcare, or for monitoring of patients with chronic health issues such as cancer, congestive heart failure, diabetes, diseases of aging, and obesity. For example, frail elderly patients could be monitored in real-time for early detection of conditions such as dehydration, electrolyte disturbances, hypoglycemia, and cardiac arrhythmias, any of which may precipitate an acute hypotensive episode that in turn may cause a fall, then an injury, then hospitalization or worse. We plan to develop the proposed FlexEM2 system through innovations in printed electrochemical materials on flexible substrates, ultra-low-power bio-instrumentation electronics, and bioelectronic system integration. We will validate the proposed system in in-vitro conditions meant to reflect activities of daily living, first in a healthy population to corrlate newly measured data with data gathered via standard clinical methods. Then we will validate the proposed system in a group of frail elderly patients, also using standard clinical methods.

Public Health Relevance

We propose to develop a tricorder-like device that can be worn directly on the skin within the form factor of a small temporary transfer tattoo. Specifically the device will be able to monitor, for the first time, a patient's sugar levels, electrolytes, heat signals, skin temperature, and respiration rate, simultaneously, all in real-time. As a flexible, bendable electronic package, the device will be unobtrusive, and with further development and testing, will be usable in systems that can diagnose, monitor, and provide real-time feedback for a wide variety of diseases or conditions including cancer, congestive heart failure, diabetes, nutrition deficiencies, and frailty in the elderly.

Agency
National Institute of Health (NIH)
Institute
National Institute of Biomedical Imaging and Bioengineering (NIBIB)
Type
Exploratory/Developmental Grants (R21)
Project #
5R21EB019698-02
Application #
9050676
Study Section
Special Emphasis Panel (ZRG1-SBIB-Q (80))
Program Officer
Lash, Tiffani Bailey
Project Start
2015-05-01
Project End
2017-02-28
Budget Start
2016-03-01
Budget End
2017-02-28
Support Year
2
Fiscal Year
2016
Total Cost
$219,390
Indirect Cost
$69,390
Name
University of California San Diego
Department
Engineering (All Types)
Type
Schools of Arts and Sciences
DUNS #
804355790
City
La Jolla
State
CA
Country
United States
Zip Code
92093
Bandodkar, Amay J; Imani, Somayeh; Nuñez-Flores, Rogelio et al. (2018) Re-usable electrochemical glucose sensors integrated into a smartphone platform. Biosens Bioelectron 101:181-187
Sempionatto, Juliane R; Nakagawa, Tatsuo; Pavinatto, Adriana et al. (2017) Eyeglasses based wireless electrolyte and metabolite sensor platform. Lab Chip 17:1834-1842
Abellán-Llobregat, A; Jeerapan, Itthipon; Bandodkar, A et al. (2017) A stretchable and screen-printed electrochemical sensor for glucose determination in human perspiration. Biosens Bioelectron 91:885-891
Jeerapan, Itthipon; Sempionatto, Juliane R; Pavinatto, Adriana et al. (2016) Stretchable Biofuel Cells as Wearable Textile-based Self-Powered Sensors. J Mater Chem A Mater 4:18342-18353
Parrilla, Marc; Cánovas, Rocío; Jeerapan, Itthipon et al. (2016) A Textile-Based Stretchable Multi-Ion Potentiometric Sensor. Adv Healthc Mater 5:996-1001
Bandodkar, Amay J; Jeerapan, Itthipon; You, Jung-Min et al. (2016) Highly Stretchable Fully-Printed CNT-Based Electrochemical Sensors and Biofuel Cells: Combining Intrinsic and Design-Induced Stretchability. Nano Lett 16:721-7
Imani, Somayeh; Bandodkar, Amay J; Mohan, A M Vinu et al. (2016) A wearable chemical-electrophysiological hybrid biosensing system for real-time health and fitness monitoring. Nat Commun 7:11650
Bandodkar, Amay J; López, Cristian S; Vinu Mohan, Allibai Mohanan et al. (2016) All-printed magnetically self-healing electrochemical devices. Sci Adv 2:e1601465
Kim, Jayoung; Imani, Somayeh; de Araujo, William R et al. (2015) Wearable salivary uric acid mouthguard biosensor with integrated wireless electronics. Biosens Bioelectron 74:1061-8