The main goal of the project is to increase sensitivity of the microtransponder-based multiplexed bioassays by (1) introducing a coating with silver nanostructures onto the microtransponders (MTPs) to enhance fluorescence, and (2) improving the fluorescence detection limit of the analyzer. The key element of the assay is the MTP, a monolithic 500 x 500 m integrated circuit chip that can transmit its identification code at a radio frequency (RF). Each chip consists of photocells, read-only memory (ROM), transmit logic circuitry, and an integrated antenna which, when the chip is illuminated, transmits an ID through a varying magnetic field. In an assay, the chips are derivatized with a molecular probe capable of binding to an analyte of interest that can be fluorescently labeled. The chips are read in a fluidics-based analyzer. The analyzer decodes the MTP ID and measures the fluorescence intensity on the MTP surface to yield information about molecular interactions in the assay. Metal-enhanced fluorescence is a phenomenon based on light-induced plasmon formation in the metal, often silver, and transmission of this energy through fluorescence. During the course of the project, we will coat MTPs with different types of sliver nanostructures, quantitate and characterize the fluorescence enhancement on the silicon surface of the MTP. In addition, the analyzer will be improved to measure very low fluorescence levels. This will be achieved by (1) using a highly sensitive low-noise photomultiplier or photon counting device and the connected electronics circuitry, (2) introducing improvements to software aimed at precise quantification of very shallow fluorescence peaks, (3) optimizing the optical path and the critical analysis of all components of the optical system, and (4) increasing the power of the excitation beam. The performance of the optimized system will be thoroughly characterized. We anticipate an overall three-order sensitivity improvement over the existing non-enhanced MTP system, which would allow for detection of biomolecules present in low femtomolar concentrations in assays where the molecules forming a sandwich have sufficiently high affinity. Several types of assays will also be developed to demonstrate the high sensitivity of the system, including assays for interleukins IL-2 and IL-6, mi RNAs and cancer markers cytochrome c and Bax.

Agency
National Institute of Health (NIH)
Institute
National Cancer Institute (NCI)
Type
Small Business Innovation Research Grants (SBIR) - Phase I (R43)
Project #
5R43CA132547-02
Application #
7623931
Study Section
Special Emphasis Panel (ZRG1-BST-F (10))
Program Officer
Beylin, David M
Project Start
2008-05-15
Project End
2010-10-30
Budget Start
2009-05-01
Budget End
2010-10-30
Support Year
2
Fiscal Year
2009
Total Cost
$100,000
Indirect Cost
Name
Pharmaseq, Inc.
Department
Type
DUNS #
027661870
City
Monmouth Junction
State
NJ
Country
United States
Zip Code
08852
Rich, Ryan; Li, Ji; Fudala, Rafal et al. (2012) Properties of coatings on RFID p-Chips that support plasmonic fluorescence enhancement in bioassays. Anal Bioanal Chem 404:2223-31
Li, Ji; Wang, Zhuying; Gryczynski, Ignacy et al. (2010) Silver nanoparticle-enhanced fluorescence in microtransponder-based immuno- and DNA hybridization assays. Anal Bioanal Chem 398:1993-2001
Luchowski, R; Matveeva, E G; Shtoyko, T et al. (2010) Single molecule immunoassay on plasmonic platforms. Curr Pharm Biotechnol 11:96-102
Gryczynski, I; Matveeva, E G; Sarkar, P et al. (2008) Metal Enhanced Fluorescence on Silicon Wafer Substrates. Chem Phys Lett 462:327-330