The menisci are C-shaped fibrocartilage disks that occupy the periphery of the knee joint and serve a number of significant mechanical functions including load distribution across articular cartilage, and joint stabilization. In the face of such mechanical demands, it is not surprising that the meniscus can become damaged. Unfortunately, surgical options for the treatment of damaged menisci are limited, primarily due to the poor vascularity and healing capacity of the central two thirds of the meniscus. Allograft implantation is complicated by the threat of transmission of infectious diseases, the difficulty of matching meniscal shape and material properties, and problems with maintaining cell viability. While meniscectomy (the complete or partial removal of the affected tissue) which is the most common orthopedic procedure performed in the United States can lead to the early onset of osteoarthritis. Providing a meniscal substitute engineered to function much in the way of the native tissue could delay or even avoid the onset of osteoarthritis. Meniscal substitutes, whether cell-seeded degradable scaffolds or synthetic implants, should ideally help to distribute loads across adjacent articular cartilage much in the way of the native tissue, thereby protecting the underlying articular cartilage. However, the properties of a substitute that are required to ensure that this functional capability is met are unclear. This is caused in part by the absence of a robust, comprehensive and physiologically relevant model within which the effect of substitute design variables can be parametrically studied. This lack of such a test, or series of tests, makes the design and evaluation of candidate scaffolds impossible, retards the regulatory pathway to commercialization, and leads to a situation where scaffolds are implanted in humans with little information about their ability to perform mechanically in the highly-loaded environment of the knee joint. Our goal is to define the relationship between meniscal substitute material and structural properties and joint contact mechanics under multiple physiological activities across a range of patient populations. The main element of the framework required to achieve this goal is a statistically-based, rapidly computable interpolator that will be built using results from experimentally-validated knee specific computational models. We will gather information about factors that most markedly affect the functional performance of the native meniscus and use this information as a template to identify the design space into which substitutes should fall if they are to function appropriately. Our goal is not to design a meniscal substitute;rather, we will demonstrate that our approach can establish a workable design space for use by those developing solutions for meniscal repair. Our efforts will culminate in the development of a new paradigm for the development and screening of any complicated tissue substitute, whether a non-degradable implant or a cell-seeded degradable scaffold prior to initiating more time consuming and costly animal and clinical trials.
Our goal is to define the relationship between meniscal material and structural properties and joint contact mechanics under multiple physiological activities across a range of patient populations. The main element of the framework required to achieve this goal is a statistically-based, rapidly computable interpolator that will be built using results from experimentally-validated computational models of the intact and meniscal substituted knee. Our approach will serve as a tool for rapid evaluation and design of functional substitutes and provide a new paradigm for the development and screening of any complicated tissue substitute, whether a non- degradable implant or a cell-seeded degradable scaffold.
|Khoshgoftar, Mehdi; Torzilli, Peter A; Maher, Suzanne A (2018) Influence of the pericellular and extracellular matrix structural properties on chondrocyte mechanics. J Orthop Res 36:721-729|
|Guo, Hongqiang; Santner, Thomas J; Lerner, Amy L et al. (2017) Reducing uncertainty when using knee-specific finite element models by assessing the effect of input parameters. J Orthop Res 35:2233-2242|
|Guo, Hongqiang; Torzilli, Peter A (2016) Shape of chondrocytes within articular cartilage affects the solid but not the fluid microenvironment under unconfined compression. Acta Biomater 29:170-179|
|Guo, Hongqiang; Maher, Suzanne A; Torzilli, Peter A (2015) A biphasic finite element study on the role of the articular cartilage superficial zone in confined compression. J Biomech 48:166-70|
|Guo, Hongqiang; Santner, Thomas J; Chen, Tony et al. (2015) A statistically-augmented computational platform for evaluating meniscal function. J Biomech 48:1444-53|
|Fritz, Jan; Lurie, Brett; Potter, Hollis G (2015) MR Imaging of Knee Arthroplasty Implants. Radiographics 35:1483-501|
|Wang, H; Chen, T; Gee, A O et al. (2015) Altered regional loading patterns on articular cartilage following meniscectomy are not fully restored by autograft meniscal transplantation. Osteoarthritis Cartilage 23:462-8|
|Guo, Hongqiang; Maher, Suzanne A; Torzilli, Peter A (2014) A biphasic multiscale study of the mechanical microenvironment of chondrocytes within articular cartilage under unconfined compression. J Biomech 47:2721-9|
|Wang, Hongsheng; Gee, Albert O; Hutchinson, Ian D et al. (2014) Bone Plug Versus Suture-Only Fixation of Meniscal Grafts: Effect on Joint Contact Mechanics During Simulated Gait. Am J Sports Med 42:1682-9|
|Wang, Hongsheng; Chen, Tony; Torzilli, Peter et al. (2014) Dynamic contact stress patterns on the tibial plateaus during simulated gait: a novel application of normalized cross correlation. J Biomech 47:568-74|
Showing the most recent 10 out of 20 publications