Dental caries is an infectious disease affecting approximately 90% of adults worldwide. Late stages of caries affect the dental pulp, leading to tissue necrosis and ultimately requiring root canal therapy. Typically, root canals in permanent teeth are treated by removing the necrotic tissue and replacing it with an artificial material. Regenerative endodontics has been proposed as an improved treatment option for these conditions. However, without controllable strategies to engineer the pulp vasculature, effective pulp regeneration is virtually impossible. It has been recently demonstrated that a functional vasculature can be engineered by culturing endothelial cells and stem cells from various sources in the correct microenvironmental conditions. However, the precise requirements specific to regenerating the pulp vasculature remain poorly understood. This project will systematically investigate three overlapping aspects that we propose are key determinants to regenerate the pulp vasculature: (1) matrix physical and mechanical properties, (2) composition, and (3) microarchitecture.
In aim 1 we will investigate the contributions of different physical and mechanical properties to the ability of human endothelial colony forming cells (ECFCs) and dental pulp stem cells (DPSCs) to form microvascular networks when embedded in hydrogels that can be photo-crosslinked to have their properties systematically adjusted. We will then engineer pulp tissue-constructs that are pre-vascularized with pre-fabricated endothelial microchannels to enhance pulp regeneration in full-length root canals in-vivo.
In aim 2 we will develop injectable and photo-curable hydrogels synthesized from the natural matrix of dentin and modified with methacrylates to test the contribution of matrix composition to the regeneration of the pulp vasculature. Further, we will combine these hydrogels with angiogenic components extracted from the dentin matrix and test their regenerative potential in vitro and in vivo.
In aim 3 we will fabricate architecturally controlled gradients of ECFC and DPSC paracrine factors using microfluidics techniques to test the contribution of tissue microarchitecture to the formation of the pulp vasculature. We will then mimic the microarchitectures of vascularized dental pulp by 3D bioprinting tissue constructs that reproduce the organization of the native pulp. In the end of this project we expect to have microengineered a 3D vascularized pulp microenvironment that will improve translational approaches for use in regenerative endodontics in adult teeth.

Public Health Relevance

This project addresses several issues of central importance to the success of pulp regeneration, including: how the mechanical and physical properties of engineered 3D microenvironments may enhance pulp vascularization; if matrix molecules derived from the natural dentin matrix can promote faster and better vascular formation in tissue engineered pulp; and how to control the microarchitecture of an engineered dental pulp. The specific model tissue being examined is primarily relevant for dental structures, but the mechanisms contributing to pulp vascularization in 3D matrices are also relevant for any vascularized tissue in the body. Therefore, the results and broad conclusions will be directly relevant towards the development of improved strategies to regenerate many other vascularized tissues in the body.

Agency
National Institute of Health (NIH)
Institute
National Institute of Dental & Craniofacial Research (NIDCR)
Type
Research Project (R01)
Project #
5R01DE026170-04
Application #
9747267
Study Section
Special Emphasis Panel (ZRG1)
Program Officer
Lumelsky, Nadya L
Project Start
2016-08-01
Project End
2021-07-31
Budget Start
2019-08-01
Budget End
2020-07-31
Support Year
4
Fiscal Year
2019
Total Cost
Indirect Cost
Name
Oregon Health and Science University
Department
Dentistry
Type
Schools of Dentistry/Oral Hygn
DUNS #
096997515
City
Portland
State
OR
Country
United States
Zip Code
97239
Fran├ža, Cristiane M; Thrivikraman, Greeshma; Athirasala, Avathamsa et al. (2018) The influence of osteopontin-guided collagen intrafibrillar mineralization on pericyte differentiation and vascularization of engineered bone scaffolds. J Biomed Mater Res B Appl Biomater :
Monteiro, Nelson; Thrivikraman, Greeshma; Athirasala, Avathamsa et al. (2018) Photopolymerization of cell-laden gelatin methacryloyl hydrogels using a dental curing light for regenerative dentistry. Dent Mater 34:389-399
Athirasala, Avathamsa; Tahayeri, Anthony; Thrivikraman, Greeshma et al. (2018) A dentin-derived hydrogel bioink for 3D bioprinting of cell laden scaffolds for regenerative dentistry. Biofabrication 10:024101
Tahayeri, Anthony; Morgan, MaryCatherine; Fugolin, Ana P et al. (2018) 3D printed versus conventionally cured provisional crown and bridge dental materials. Dent Mater 34:192-200
Thrivikraman, Greeshma; Athirasala, Avathamsa; Twohig, Chelsea et al. (2017) Biomaterials for Craniofacial Bone Regeneration. Dent Clin North Am 61:835-856
Athirasala, Avathamsa; Tahayeri, Anthony; Thrivikraman, Greeshma et al. (2017) A Dentin-derived hydrogel bioink for 3D printing of cell laden scaffolds for regenerative dentistry. Biofabrication :
Athirasala, Avathamsa; Lins, Fernanda; Tahayeri, Anthony et al. (2017) A Novel Strategy to Engineer Pre-Vascularized Full-Length Dental Pulp-like Tissue Constructs. Sci Rep 7:3323
Bertassoni, Luiz E (2017) Dentin on the nanoscale: Hierarchical organization, mechanical behavior and bioinspired engineering. Dent Mater 33:637-649
Bertassoni, Luiz E; Swain, Michael V (2017) Removal of dentin non-collagenous structures results in the unraveling of microfibril bundles in collagen type I. Connect Tissue Res 58:414-423