The proposed effort will develop technology that is suited for both ultra-high resolution animal imaging systems and other high resolution applications such as human breast and head imaging. A key part of the proposed concept is the development of a highly modular approach to the detectors and supporting electronics. In this way; the basic detector/electronic modules can be assembled in a wide variety of geometries optimized for specific tasks - providing a cost effective approach to the assembly of such systems. The geometric arrangement of the modules will principally be accounted for in software rather than in the detector electronics. This approach ensures that imaging systems built using the technology can easily adapt to the changing demands of the biological research. Two types of detector modules with associated application specific integrated circuits (ASIC) are proposed for development: an ultra-high spatial resolution design using 0.8x0.8x6 mm LSO crystals and a depth-of interaction (DOI) design using 2x2x20 mm LSO crystals. The ultra-high resolution design is intended for mouse imaging applications whereas the DOI design is intended for more general purpose imaging systems. Both designs will use multi-photocathode photomultiplier tubes (PMTs) and ASICs to provide the modular design. The designs will also be easy to adapt to new technology. For example, the applicants can replace the PMTs with solid state devices such as avalanche photodiodes if they become cost effective. The effort will begin with the development of the ultra-high resolution module, related ASICs, and data acquisition system. In parallel with that effort, the basic optimization for the DOI design developed at the University of Washington will be undertaken. Once the optimization work is finished, complete DOI modules and ASICs will be fabricated. For both modules, careful characterization of the detector performance will be undertaken. Issues such as detector calibration, DOI accuracy and spatial resolution in the presence of object scatter, and count rate performance will be included. These results will be incorporated into Monte Carlo simulations covering a range of system geometries for animal imaging (e.g. mouse, rat, rabbit, dog, and primate). The final detector module designs will be fully documented (including ASIC fabrication files) to allow duplication at other laboratories.

Agency
National Institute of Health (NIH)
Institute
National Institute of Biomedical Imaging and Bioengineering (NIBIB)
Type
Research Project (R01)
Project #
3R01EB002117-04S1
Application #
6813056
Study Section
Diagnostic Imaging Study Section (DMG)
Program Officer
Wolbarst, Anthony B
Project Start
2000-07-01
Project End
2005-06-30
Budget Start
2003-10-24
Budget End
2004-06-30
Support Year
4
Fiscal Year
2004
Total Cost
$24,189
Indirect Cost
Name
University of Washington
Department
Radiation-Diagnostic/Oncology
Type
Schools of Medicine
DUNS #
605799469
City
Seattle
State
WA
Country
United States
Zip Code
98195
Dey, Samrat; Rudell, Jacques C; Lewellen, Thomas K et al. (2017) A CMOS Front-End Interface ASIC for SiPM-based Positron Emission Tomography Imaging Systems. IEEE Biomed Circuits Syst Conf 2017:
Hunter, William C J; Miyaoka, Robert S; MacDonald, Lawrence et al. (2015) Light-Sharing Interface for dMiCE Detectors Using Sub-Surface Laser Engraving. IEEE Trans Nucl Sci 62:27-35
Pierce, L A; Hunter, W C J; Haynor, D R et al. (2014) Multiplexing strategies for monolithic crystal PET detector modules. Phys Med Biol 59:5347-60
Hunter, William C J; Miyaoka, Robert S; MacDonald, Lawrence et al. (2013) Light-Sharing Interface for dMiCE Detectors using Sub-Surface Laser Engraving. IEEE Nucl Sci Symp Conf Rec (1997) 2013:1-7
Li, Xiaoli; Alessio, Adam M; Burnett, Thompson H et al. (2013) Performance Evaluation of Small Animal PET Scanners With Different System Designs. IEEE Trans Nucl Sci 60:
Hunter, William C J; Barrett, Harrison H; Muzi, John P et al. (2013) SCOUT: a fast Monte-Carlo modeling tool of scintillation camera output. Phys Med Biol 58:3581-98
Hunter, William C J; Barrett, Harrison H; Lewellen, Tom K et al. (2013) Multiple-hit parameter estimation in monolithic detectors. IEEE Trans Med Imaging 32:329-37
Haselman, M D; Pasko, J; Hauck, S et al. (2012) FPGA-Based Pulse Pile-Up Correction With Energy and Timing Recovery. IEEE Trans Nucl Sci 59:
Li, Xiaoli; Hunter, William C J; Lewellen, Tom K et al. (2012) Use of Cramer-Rao Lower Bound for Performance Evaluation of Different Monolithic Crystal PET Detector Designs. IEEE Trans Nucl Sci 59:3-12
Pierce, Larry; Miyaoka, Robert; Lewellen, Tom et al. (2012) Detector Position Estimation for PET Scanners. Nucl Instrum Methods Phys Res A 677:74-79

Showing the most recent 10 out of 36 publications