The overall goal of this project is the development of an interactive, image-guided system for accurately placing ablation lesions in the left atrium for the treatment of arrythmias. Atrial fibrillation (AF) affects 10% of the population over age 70 and causes about 1/3 of strokes. Only 2/3 of percutaneous procedures for AF succeed even in carefully selected patients due to technical limitations in both visualizing tissue/device interaction and controlling catheter position. We believe that the combination in a single procedure of real-time visualization and guidance, interactive device control, and immediate lesion assessment will be critical in providing reliable, robust atrial ablation and will increase effectiveness far beyond the sum of the individual parts. Guidance and visualization will be provided by MRI, which permits real-time anatomic visualization, allows active tracking of devices, and provides many techniques for ablation monitoring and control. Intuitive, accurate access to the entire left atrium will be accomplished via an interactive, feedback controlled catheter manipulation system integrated with a real-time 3D visualization environment for navigation and device placement. This system will incorporate a haptic interface for robotic control integrating MR visual feedback catheter force feedback. Finally, direct MR visualization of acute lesions will provide immediate verification of ablative success. Imaging the lesion development will be accomplished via delayed enhancement, T2 weighted imaging, and a new MR RF current mapping technique that can potentially highlight tissue conductivity changes in the myocardium post-ablation. Specifically, our aims are to: 1) Develop improved MRI methods and devices for real-time 3D guidance during cardiac ablations. 2) Develop a general purpose intracardiac catheter system integrating sensory inputs and motor controls to provide precise control of the interventional catheter. 3) Develop and test real-time methods to assess tissue viability and electrical conductivity that can accurately predict and visualize the ablation pattern. The combination of visualization, guidance, and verification will allow quick, reliable atrial ablations, dramatically improving patient outcomes. The overarching objective of this proposal is to develop an integrated set of technologies to enable the imaging, mechanical, and control systems needed to replicate the surgeon's visualization, dexterity, and tools for performing percutaneous intracardiac surgery. This project will utilize a multi-disciplinary team (engineers, imaging scientists, and cardiologists) to address all the technical challenges in translating this system to clinical practice. Our initial focus will be intracardiac ablation of atrial fibrillation, given its prevalence, substantial clinical impact, and current suboptimal percutaneous success. This research - developing a minimally invasive system for atrial fibrillation procedures - is important to public health because it may allow many open-heart surgery procedures to be performed instead using less invasive catheters. This research also initially targets atrial fibrillation as it is very common (1 in 4 Americans develop it in their lifetime), leads to 1/3 of strokes, and there is a need for a successful method to cure it less invasively. ? ? ?

Agency
National Institute of Health (NIH)
Institute
National Institute of Biomedical Imaging and Bioengineering (NIBIB)
Type
Exploratory/Developmental Grants (R21)
Project #
1R21EB007715-01
Application #
7303763
Study Section
Special Emphasis Panel (ZEB1-OSR-B (M1))
Program Officer
Haller, John W
Project Start
2007-08-01
Project End
2010-07-31
Budget Start
2007-08-01
Budget End
2008-07-31
Support Year
1
Fiscal Year
2007
Total Cost
$461,867
Indirect Cost
Name
Stanford University
Department
Engineering (All Types)
Type
Schools of Engineering
DUNS #
009214214
City
Stanford
State
CA
Country
United States
Zip Code
94305
Ellenor, Christopher W; Stang, Pascal P; Etezadi-Amoli, Maryam et al. (2015) Offline impedance measurements for detection and mitigation of dangerous implant interactions: an RF safety prescreen. Magn Reson Med 73:1328-39
Khalighi, Mohammad Mehdi; Rutt, Brian K; Kerr, Adam B (2013) Adiabatic RF pulse design for Bloch-Siegert B1+ mapping. Magn Reson Med 70:829-35
Stang, Pascal P; Conolly, Steven M; Santos, Juan M et al. (2012) Medusa: a scalable MR console using USB. IEEE Trans Med Imaging 31:370-9
Lee, Daeho; Santos, Juan M; Hu, Bob S et al. (2012) Reducing artifacts in one-dimensional Fourier velocity encoding for fast and pulsatile flow. Magn Reson Med 68:1876-85
Shultz, Kim; Stang, Pascal; Kerr, Adam et al. (2012) RF field visualization of RF ablation at the Larmor frequency. IEEE Trans Med Imaging 31:938-47
Lee, Daeho; Grissom, William A; Lustig, Michael et al. (2012) VERSE-guided numerical RF pulse design: a fast method for peak RF power control. Magn Reson Med 67:353-62
Zanchi, Marta G; Stang, Pascal; Kerr, Adam et al. (2011) Frequency-offset Cartesian feedback for MRI power amplifier linearization. IEEE Trans Med Imaging 30:512-22
Cheng, Joseph Y; Santos, Juan M; Pauly, John M (2011) Fast concomitant gradient field and field inhomogeneity correction for spiral cardiac imaging. Magn Reson Med 66:390-401
Grissom, William A; Rieke, Viola; Holbrook, Andrew B et al. (2010) Hybrid referenceless and multibaseline subtraction MR thermometry for monitoring thermal therapies in moving organs. Med Phys 37:5014-26
Zanchi, Marta G; Pauly, John M; Scott, Greig C (2010) Frequency-Offset Cartesian Feedback Based on Polyphase Difference Amplifiers. IEEE Trans Microw Theory Tech 58:1297-1308

Showing the most recent 10 out of 19 publications