Articular cartilage exhibits a poor intrinsic healing capacity when injured in trauma or by degenerative diseases such as osteoarthritis (OA). In cartilage tissue engineering, there are two prevailing points of view regarding implantation of engineered constructs in vivo. One approach places the cell-scaffold immediately into the defect site and relies on the in situ biological and loading environment to foster development of the fledgling construct. Another approach is to first cultivate constructs in vitro to permit some elaboration of material properties to minimize the propensity of construct cracking. Advocated by Guilak and co-workers (2000), the concept of Functional Tissue Engineering (FTE) has promoted the use of physiologic loading bioreactor systems to cultivate engineered cartilage tissues to better produce replacement tissues with functional (load- bearing) properties of articular cartilage. While an FTE approach has shown promise in guiding tissue development in culture, the clinical benefits of mechanical preconditioning of engineered constructs for cartilage repair is currently unknown. Tissue repair may be influenced by in vitro loading-induced composition and structure and/or by the act of preconditioning of chondrocytes to a dynamic loading environment prior to introduction in the joint loading milieu. In this competitive renewal two parallel but independent aims, one hypothesis-driven and the other model development-driven, are proposed and address the same fundamental effort to translate our basic tissue engineering studies to animal models and eventually to humans.
Specific Aim 1 (hypothesis-driven): To test the hypothesis that mechanical preconditioning improves engineered construct performance, compared to free-swelling (non-loaded) constructs, in the functional repair of full- thickness articular cartilage defects. Apply dynamic deformational loading (DL) or free-swelling (FS) to chondrocyte-seeded hydrogel constructs in serum-free culture. When constructs attain a Young's modulus of 25% and 100% of site-matched native canine articular cartilage, implant constructs into a defect in the canine femoral condyle (high load-bearing) or trochlear groove (moderate load-bearing) and monitor tissue repair (e.g., material properties, biochemical properties, arthroscopy, and lameness scores) over a 1-year period.
Specific Aim 2 (model development-driven): To develop a computational biphasic three-dimensional contact model of the canine knee that will provide insights to the engineered construct implantation environment. Perform validation of construct crack initiation in canine cadaver knee loading studies. This model will aid interpretation of the experimental defect repair results (Specific Aim 1) as well as provide general guidance for the requisite material properties of the engineered cartilage construct necessary to survive the in situ loading environment for a focal defect of a particular diameter and anatomical location, and initial material properties. To test our hypotheses and achieve our aims, a multidisciplinary team of investigators from Columbia University and the University of Missouri has been assembled. These studies have been designed with the anticipation that the outcomes of our specific aims will eventually allow us to design experiments to predict in vivo repair performance of engineered tissues.

Public Health Relevance

As the growing promise of engineered cartilage grafts is realized in clinical practice, it will be important to understand the implications that mechanical preconditioning of engineered tissue grafts in culture has on tissue repair and clinical outcome. Moreover, orthopaedic surgeons will need specific guidelines to guide them in reparative strategies using engineered cartilage that may possess tissue properties inferior to the native tissue. A clinically relevant algorithm derived from translational evidence for guiding decisions regarding indications for current and future cartilage repair strategies would be invaluable to surgeons.

Agency
National Institute of Health (NIH)
Institute
National Institute of Arthritis and Musculoskeletal and Skin Diseases (NIAMS)
Type
Research Project (R01)
Project #
3R01AR046568-09A1S1
Application #
8033541
Study Section
Musculoskeletal Tissue Engineering Study Section (MTE)
Program Officer
Wang, Fei
Project Start
2000-01-24
Project End
2013-08-31
Budget Start
2010-02-25
Budget End
2010-08-31
Support Year
9
Fiscal Year
2010
Total Cost
$71,455
Indirect Cost
Name
Columbia University (N.Y.)
Department
Biomedical Engineering
Type
Schools of Engineering
DUNS #
049179401
City
New York
State
NY
Country
United States
Zip Code
10027
Nims, Robert J; Cigan, Alexander D; Durney, Krista M et al. (2017) * Constrained Cage Culture Improves Engineered Cartilage Functional Properties by Enhancing Collagen Network Stability. Tissue Eng Part A 23:847-858
Nover, Adam B; Hou, Gary Y; Han, Yang et al. (2016) High intensity focused ultrasound as a tool for tissue engineering: Application to cartilage. Med Eng Phys 38:192-8
Nover, Adam B; Stefani, Robert M; Lee, Stephanie L et al. (2016) Long-term storage and preservation of tissue engineered articular cartilage. J Orthop Res 34:141-8
Nover, Adam B; Lee, Stephanie L; Georgescu, Maria S et al. (2015) Porous titanium bases for osteochondral tissue engineering. Acta Biomater 27:286-293
Tan, A R; Alegre-Aguarón, E; O'Connell, G D et al. (2015) Passage-dependent relationship between mesenchymal stem cell mobilization and chondrogenic potential. Osteoarthritis Cartilage 23:319-27
Nims, Robert J; Cigan, Alexander D; Albro, Michael B et al. (2015) Matrix Production in Large Engineered Cartilage Constructs Is Enhanced by Nutrient Channels and Excess Media Supply. Tissue Eng Part C Methods 21:747-57
Cigan, Alexander D; Nims, Robert J; Albro, Michael B et al. (2014) Nutrient channels and stirring enhanced the composition and stiffness of large cartilage constructs. J Biomech 47:3847-54
Alegre-Aguarón, Elena; Sampat, Sonal R; Xiong, Jennifer C et al. (2014) Growth factor priming differentially modulates components of the extracellular matrix proteome in chondrocytes and synovium-derived stem cells. PLoS One 9:e88053
Ponnurangam, Sathish; O'Connell, Grace D; Chernyshova, Irina V et al. (2014) Beneficial effects of cerium oxide nanoparticles in development of chondrocyte-seeded hydrogel constructs and cellular response to interleukin insults. Tissue Eng Part A 20:2908-19
Nims, Robert J; Cigan, Alexander D; Albro, Michael B et al. (2014) Synthesis rates and binding kinetics of matrix products in engineered cartilage constructs using chondrocyte-seeded agarose gels. J Biomech 47:2165-72

Showing the most recent 10 out of 73 publications