Recently there has been renewed interest in the use of hyperthermia (elevated temperatures in the range of 43-55 degrees C) as a treatment for cancer, particularly as an adjuvant to radiation therapy and chemotherapy. Two of the major problems in hyperthermia are the design of epuipment to heat deep-seated tumors and thermal dosimetry, i.e., adequate knowledge of the temperature distributions produced by the equipment. The major objective of this research is to develop computer-based software packages for calculating temperature distributions for hyperthermia applicators. Our long term objectives are: (1) to be able to evaluate and compare theoretically existing hyperthermia systems for their capability to deposit energy into the tumor volume and to produce desirable temperature distributions, (2) to propose and evaluate new types of systems that might come closer to meeting the desired specifications for a clinical system, and (3) to develop algorithms that can be used for patient treatment planning for hyperthemia.
The specific aims i nclude: (1) the development of numerical methods for calculating the three-dimensional power deposition patterns and temperature distributions for commonly used hyperthermia systems; (2) studies of the optimum system parameters for heating tumors at various sites within the body; (3) comparative studies of three-dimensional models of various hyperthermia systems; (4) the development of methods for automated entry of specific patient anatomical information from CT or other imaging modalities into the computer; and (5) the development of two-dimensional software packages compatible with existing workstations that can be easily transferred to other institutions.

Agency
National Institute of Health (NIH)
Institute
National Cancer Institute (NCI)
Type
Research Project (R01)
Project #
5R01CA037245-07
Application #
3175077
Study Section
Radiation Study Section (RAD)
Project Start
1984-05-01
Project End
1992-04-30
Budget Start
1990-05-01
Budget End
1991-04-30
Support Year
7
Fiscal Year
1990
Total Cost
Indirect Cost
Name
Dartmouth College
Department
Type
Schools of Engineering
DUNS #
041027822
City
Hanover
State
NH
Country
United States
Zip Code
03755
Paulsen, K D; Geimer, S; Tang, J et al. (1999) Optimization of pelvic heating rate distributions with electromagnetic phased arrays. Int J Hyperthermia 15:157-86
Paulsen, K D (1994) Finite-element solution of Maxwell's equations with Helmholtz forms. J Opt Soc Am A Opt Image Sci Vis 11:1434-44
Jia, X; Paulsen, K D; Buechler, D N et al. (1994) Finite element simulation of Sigma 60 heating in the Utah phantom: computed and measured data compared. Int J Hyperthermia 10:755-74
Paulsen, K D; Jia, X; Sullivan Jr, J M (1993) Finite element computations of specific absorption rates in anatomically conforming full-body models for hyperthermia treatment analysis. IEEE Trans Biomed Eng 40:933-45
Yuan, X; Strohbehn, J W; Lynch, D R et al. (1990) Theoretical investigation of a phased-array hyperthermia system with movable apertures. Int J Hyperthermia 6:227-40
Strohbehn, J W; Curtis, E H; Paulsen, K D et al. (1989) Optimization of the absorbed power distribution for an annular phased array hyperthermia system. Int J Radiat Oncol Biol Phys 16:589-99
Wong, T Z; Mechling, J A; Jones, E L et al. (1988) Transient finite element analysis of thermal methods used to estimate SAR and blood flow in homogeneously and nonhomogeneously perfused tumour models. Int J Hyperthermia 4:571-92
Paulsen, K D; Strohbehn, J W; Lynch, D R (1988) Theoretical electric field distributions produced by three types of regional hyperthermia devices in a three-dimensional homogeneous model of man. IEEE Trans Biomed Eng 35:36-45
Mechling, J A; Strohbehn, J W (1986) A theoretical comparison of the temperature distributions produced by three interstitial hyperthermia systems. Int J Radiat Oncol Biol Phys 12:2137-49