The overall goal of this research program is the improvement of a wide range of dental procedures through the use of fiber-reinforced composites (FRC). The FRC, in the form of wires, bars, and rods, will replace traditional metal alloys in applications such as frameworks for prosthodontic appliances, periodontal splints, orthodontic retainers, and orthodontic archwires. FRC prosthetic appliances will preserve tooth structure, allow for improved design, lower costs, and allow fabrication and delivery in one visit. The proposed research will focus on improving the interface between glass and polymer matrices of interest. Molecular ordering of polycarbonate (PC) at the glass fiber interface will be produced by various fiber surface treatments. It is hypothesized that stable bonds can be formed between the treated glass and dependent OH groups in the PC. The treated fibers will also be used in combination with UV and visible light cured resins. Model systems with glass beads, Mg(OH) 2 and Ca(OH)2 particles will be studied prior to experimentation with long fibers. The use of plasma treated polyethylene (PE) fibers will be explored to improve ultimate strain. Interfacial behavior will be characterized with SEM and the single embedded fiber technique. Birefringence methods will be used to monitor morphological changes in the matrices adjacent to the fiber surfaces. ESCA will be used to monitor surface changes of the E-glass and plasma treated PE. Bulk samples will be prepared, morphology and dry/wet mechanical properties will be measured. FRC dental appliances will be fabricated and evaluated in clinical simulations.

Agency
National Institute of Health (NIH)
Institute
National Institute of Dental & Craniofacial Research (NIDCR)
Type
Research Project (R01)
Project #
5R01DE009126-05
Application #
2130433
Study Section
Oral Biology and Medicine Subcommittee 1 (OBM)
Project Start
1990-07-01
Project End
1996-06-30
Budget Start
1994-07-01
Budget End
1995-06-30
Support Year
5
Fiscal Year
1994
Total Cost
Indirect Cost
Name
University of Connecticut
Department
Dentistry
Type
Schools of Dentistry
DUNS #
City
Farmington
State
CT
Country
United States
Zip Code
06030
Ardeshna, Anil P (2011) Clinical evaluation of fiber-reinforced-plastic bonded orthodontic retainers. Am J Orthod Dentofacial Orthop 139:761-7
Freilich, Martin A; Duncan, Jacqueline P; Alarcon, E Karina et al. (2002) The design and fabrication of fiber-reinforced implant prostheses. J Prosthet Dent 88:449-54
Freilich, M A; Karmaker, A C; Burstone, C J et al. (1998) Development and clinical applications of a light-polymerized fiber-reinforced composite. J Prosthet Dent 80:311-8
Freilich, M A; Duncan, J P; Meiers, J C et al. (1998) Preimpregnated, fiber-reinforced prostheses. Part I. Basic rationale and complete-coverage and intracoronal fixed partial denture designs. Quintessence Int 29:689-96
Karmaker, A C; DiBenedetto, A T; Goldberg, A J (1997) Continuous fiber reinforced composite materials as alternatives for metal alloys used for dental appliances. J Biomater Appl 11:318-28
Freilich, M A; Goldberg, A J (1997) The use of a pre-impregnated, fiber-reinforced composite in the fabrication of a periodontal splint: a preliminary report. Pract Periodontics Aesthet Dent 9:873-4, 876
Altieri, J V; Burstone, C J; Goldberg, A J et al. (1994) Longitudinal clinical evaluation of fiber-reinforced composite fixed partial dentures: a pilot study. J Prosthet Dent 71:16-22
Goldberg, A J; Burstone, C J; Hadjinikolaou, I et al. (1994) Screening of matrices and fibers for reinforced thermoplastics intended for dental applications. J Biomed Mater Res 28:167-73
Goldberg, A J; Burstone, C J (1992) The use of continuous fiber reinforcement in dentistry. Dent Mater 8:197-202