Hyperthermia, particularly when used in conjunction with ionizing radiation, is becoming a viable modality for cancer treatment. A high percentage of the clinical data currently available were obtained with applicators allowing little control of heating patterns within the treatment volume. However, such control is essential for obtaining therapeutically optimun temperature distributions, particularly when blood flow changes during treatment. This proposal discusses several new phased array concepts for ultrasound hyperthermia applicators which should, based on extensive preliminary studies, provide the needed heating flexibility. Optimun engineering designs will be obtained by computer simulation involving acoustic field intensity computations and temperature distributions in the treatment volume as predicted by appropriate thermal modeling. Prototype applicators based on optimal designs will be fabricated and tested to demonstrate feasibility and to provide the technical basis for eventual construction of new hyperthermia systems. Testing will involve detailed field pattern measurements, animal studies involving normal and tumor tissues, and preliminary clinical trials. Preliminary research has led to several new ultrasound applicator concepts, viz., the concentric-ring and sector-vortex phased arrays. Concentric-ring phased arrays subdivided into sectors (radial slices) can, with appropriate phasing, produce variable diameter annular (or ring) focal regions. Such focal rings can be effective in heating tumors if directed around the tumor periphery. Scanning the focal ring diameter and focal length provides considerable heating flexibility. Moreover, appropriate phasing of the rings and sectors can produce patterns which are circularly asymmetric. By controlling these asymmetries, nonspherical tumors can be heated more optimally. Research on other more advance concepts is also proposed herein.

Agency
National Institute of Health (NIH)
Institute
National Cancer Institute (NCI)
Type
Research Project (R01)
Project #
5R01CA044124-05
Application #
3186675
Study Section
Radiation Study Section (RAD)
Project Start
1987-08-01
Project End
1992-01-31
Budget Start
1991-02-01
Budget End
1992-01-31
Support Year
5
Fiscal Year
1991
Total Cost
Indirect Cost
Name
University of Michigan Ann Arbor
Department
Type
Schools of Engineering
DUNS #
791277940
City
Ann Arbor
State
MI
Country
United States
Zip Code
48109
Botros, Y Y; Volakis, J L; VanBaren, P et al. (1997) A hybrid computational model for ultrasound phased-array heating in presence of strongly scattering obstacles. IEEE Trans Biomed Eng 44:1039-50
VanBaren, P; Ebbini, E S (1995) Multipoint temperature control during hyperthermia treatments: theory and simulation. IEEE Trans Biomed Eng 42:818-27
McGough, R J; Wang, H; Ebbini, E S et al. (1994) Mode scanning: heating pattern synthesis with ultrasound phased arrays. Int J Hyperthermia 10:433-42
Umemura, S I; Holmes, K R; Frizzell, L A et al. (1992) Insonation of fixed porcine kidney by a prototype sector-vortex-phased array applicator. Int J Hyperthermia 8:831-42
McGough, R J; Ebbini, E S; Cain, C A (1992) Direct computation of ultrasound phased-array driving signals from a specified temperature distribution for hyperthermia. IEEE Trans Biomed Eng 39:825-35
Ebbini, E S; Cain, C A (1991) Optimization of the intensity gain of multiple-focus phased-array heating patterns. Int J Hyperthermia 7:953-73
Ebbini, E S; Cain, C A (1991) A spherical-section ultrasound phased array applicator for deep localized hyperthermia. IEEE Trans Biomed Eng 38:634-43
Ibbini, M S; Cain, C A (1990) The concentric-ring array for ultrasound hyperthermia: combined mechanical and electrical scanning. Int J Hyperthermia 6:401-19
Umemura, S I; Cain, C A (1990) Analysis of temperature responses to diffused ultrasound focal fields produced by a sector-vortex phased array. Int J Hyperthermia 6:641-54