Implant wear is the major problem limiting the longevity of modern total joint replacements. Efforts to combat implant wear have included design improvements and the introduction of new bearing materials. These efforts are hampered, however, by lack of understanding of wear mechanisms and of how material and implant design variables influence wear. Three related but heretofore primarily separate approaches have been employed in studying wear: retrieval analysis, wear simulators and computational simulations. All three have provided valuable information, but all suffer from limitations. Observations made from retrieved components limited in that the loads and kinematics responsible for the damage are largely unknown. Wear simulators connect capture the complex in vivo environment that leads to wear and do not measure the stress and strain state in the polyethylene. Computational simulations using finite element analysis (FEA) have limitations as well - wear performance has been assessed only from singular stress or strain measures and the necessary analytical complexity has reduced studies to only a few loading conditions or relative positions of the implant components. To overcome limitations in these individual methods, we have embarked on a project to merge all three approaches. In preliminary work, we have combined a computational model of a knee simulator with FEA of the tibial component, wear measurements performed on the knee simulator, and observations made on retrieved components to determine the stress and strain histories in tibial components tested in the simulator. Our goal is to develop an integrated approach that combines the strengths of each methodology to provide insight into wear mechanisms and a tool for assessing the preclinical performance of total knee replacements. To reach this goal, we must meet three Specific Aims: (1) refine the computational model to improve the way in which anteroposterior and torsional constraints to the knee simulator are described and to incorporate an improved material model for UHMWPE that will allow residual strains and stresses to develop in the material; (2) calibrate the model to accurately predict forces, kinematics, and contact areas and locations for a range of simulator conditions and implant designs; (3) optimize the knee simulator to reproduce retrieval patterns that are consistent within knee designs by using numerical simulation, simulator data, and retrieval analysis. Achieving our goal will provide a validated link between stresses and strains in polyethylene knee implants and wear and preclinical testing protocols that maximize knee simulator efficiency by using our computational simulation to minimize the number of simulator tests required to assess wear performance.

Agency
National Institute of Health (NIH)
Institute
National Institute of Arthritis and Musculoskeletal and Skin Diseases (NIAMS)
Type
Research Project (R01)
Project #
1R01AR049793-01
Application #
6599844
Study Section
Orthopedics and Musculoskeletal Study Section (ORTH)
Program Officer
Panagis, James S
Project Start
2003-04-10
Project End
2006-03-31
Budget Start
2003-04-10
Budget End
2004-03-31
Support Year
1
Fiscal Year
2003
Total Cost
$309,082
Indirect Cost
Name
Hospital for Special Surgery
Department
Type
DUNS #
622146454
City
New York
State
NY
Country
United States
Zip Code
10021
Andriacchi, Thomas P; Favre, Julien (2014) The nature of in vivo mechanical signals that influence cartilage health and progression to knee osteoarthritis. Curr Rheumatol Rep 16:463
Han, Gang; Santner, Thomas J; Rawlinson, Jeremy J (2009) Simultaneous Determination of Tuning and Calibration Parameters for Computer Experiments. Technometrics 51:464-474
Cottrell, Jocelyn M; Babalola, Omotunde; Furman, Bridgette S et al. (2006) Stair ascent kinematics affect UHMWPE wear and damage in total knee replacements. J Biomed Mater Res B Appl Biomater 78:15-9
Rawlinson, Jeremy J; Furman, Bridgette D; Li, Stephen et al. (2006) Retrieval, experimental, and computational assessment of the performance of total knee replacements. J Orthop Res 24:1384-94