Our goal is to design and fabricate an automated sample processor for massively parallel analysis of nucleic acid isolated from blood or bone marrow. It will comprise an array of miniaturized integrated disposable sample preparation devices designed for cell isolation and amplification of DNA or RNA. This processor will provide much needed simplification and automation of sample preparation essential for large-scale cancer studies, and will be part of a larger system containing an array of analytical stems fed by the individual sample preparation devices. Each device will accept a nucleic acid, either directly or after an intermediate amplification step (PCR, RT-PCR) to the detection modules. The complexity of the processing leads up to design the devices in two ways. Firstly, we will stack the individual preparative microstructures into a series of modules that interlock for fluidic connection. Modules can then be assembled for a desired preparative function. In a second and more challenging format, we will integrate all of the preparative functions into a single disposable totally integrated microchip. The microchip modules and the totally integrated microchip will be fabricated from silicon and glass using standard photolithography, wet-chemical etching and anodic bonding, and will contain microfilters, channels and chambers designed for each of the specific functions. Each type of device will contain microfilters, channels and chambers designed for each of the specific functions. Each type of device will be housed in a plastic module that will provide microfluidic connections in and out of the chip for sample application and delivery of processed nucleic acid. A key part of the microfluidics for each the proposed devices, is a new type of membrane valve based on a discontinuous microchannel and a membrane. The microstructured integrated devices will facilitate high throughput, fully automated parallel processing or samples for nucleic acid analysis with reduced sample and reagent consumption, and no cross-contamination. We have selected the liquid cancers as an important and clinically relevant model for assessing the effectiveness of the micro-chip based systems. The system will be optimized for both whole blood and bone marrow samples. The overall goal of this project will be accomplished by the design and optimization of: 1) a microfluidic module for sample application and delivery of processed sample for analysis; 2) a series of six microchips that will isolate human white blood cells, isolate cell sub-sets, isolate DNA or RNA, amplify DNA or RNA; 3) a totally integrated miniature microchip or a series of interlocking microchip modules that can perform combinations of cell isolation, cell selection, nucleic acid isolation and nucleic acid amplification; and finally, 4) system integration to provide a multi-place sample processor.

Agency
National Institute of Health (NIH)
Institute
National Cancer Institute (NCI)
Type
Research Project (R01)
Project #
5R01CA078848-02
Application #
6137676
Study Section
Special Emphasis Panel (ZCA1-RLB-Y (M1))
Program Officer
Song, Min-Kyung H
Project Start
1999-01-15
Project End
2002-12-31
Budget Start
2000-01-01
Budget End
2000-12-31
Support Year
2
Fiscal Year
2000
Total Cost
$311,465
Indirect Cost
Name
University of Pennsylvania
Department
Pathology
Type
Schools of Medicine
DUNS #
042250712
City
Philadelphia
State
PA
Country
United States
Zip Code
19104
Kricka, Larry J; Park, Jason Y; Li, Sam F Y et al. (2005) Miniaturized detection technology in molecular diagnostics. Expert Rev Mol Diagn 5:549-59
Fortina, Paolo; Kricka, Larry J; Surrey, Saul et al. (2005) Nanobiotechnology: the promise and reality of new approaches to molecular recognition. Trends Biotechnol 23:168-73
Panaro, Nicholas J; Lou, Xing Jian; Fortina, Paolo et al. (2005) Micropillar array chip for integrated white blood cell isolation and PCR. Biomol Eng 21:157-62
Lou, Xing Jian; Panaro, Nicholas J; Wilding, Peter et al. (2004) Mutation detection using ligase chain reaction in passivated silicon-glass microchips and microchip capillary electrophoresis. Biotechniques 37:392, 394, 396-8
Lou, Xing Jian; Panaro, Nicholas J; Wilding, Peter et al. (2004) Increased amplification efficiency of microchip-based PCR by dynamic surface passivation. Biotechniques 36:248-52
Kricka, Larry J; Fortina, Paolo; Panaro, Nicholas J et al. (2002) Fabrication of plastic microchips by hot embossing. Lab Chip 2:1-4
Nachamkin, I; Panaro, N J; Li, M et al. (2001) Agilent 2100 bioanalyzer for restriction fragment length polymorphism analysis of the Campylobacter jejuni flagellin gene. J Clin Microbiol 39:754-7
Yuen, P K; Kricka, L J; Fortina, P et al. (2001) Microchip module for blood sample preparation and nucleic acid amplification reactions. Genome Res 11:405-12
Panaro, N J; Yuen, P K; Sakazume, T et al. (2000) Evaluation of DNA fragment sizing and quantification by the agilent 2100 bioanalyzer. Clin Chem 46:1851-3