Medical imaging is critical for quality health care for early detection and efficient treatment of disease and injury. In 1970s, when MRI became a clinic tool, it was enthusiastically embraced by the hospitals. These hospitals, having since moved from systems of 0.5 T to 1-1.5 T, now target 3 T. However, ~20,000 MRI units now in service worldwide benefit only ~10 % of the total humanity, chiefly in the urban areas of the developed nations. One direct and quick way to redress this glaring disparity and unfairness in medical treatment opportunities is to develop low-cost and easy-to- operate MRI systems. For a vast majority of humanity, low-cost 0.5-T superconducting MRI units would be beneficial and should also help to reduce health care costs in the U.S. Compared with the critical temperatures ( Tc ) of NbTi (~10 K) and Nb 3Sn (~18 K), Tc ~40 K of MgB2 promises obvious advantages. Owing to a higher Tc, an MgB 2 magnet will have its stability considerably enhanced and cryogenic system substantially simplified. Based on the technologies developed in the original project, we propose to complete, at the conclusion of Phase II, a whole- body fully functional MRI magnet of 0.5 T. In this Phase I project, we will address issues, which were not investigated in the original project. In Phase I, our focus will be on the fabrication of MAIN COIL that will be operated in persistent mode. We will address the issues of conductor (particularly performance consistency in long lengths), protection, and temporal stability. In Phase II, we will incorporate a set of correction coils to transform the Phase I system to a fully functional MRI model magnet. With the cryocooler-SN 2 approach demonstrated in the original project and to be reconfirmed by the Phase I system, the magnet can operate continuously without liquid helium. Significance of the program is further advancement in the following design/operation issues for HTS magnets: 1) using MgB 2, to keep the HTS magnet low-cost;2) operating at around 10--15 K for enhanced stability;3) liquid cryogen free """"""""dry''environment;4) persistent-mode operation for good temporal stability and ease of operation;5) protection from quench damages. In addition, the cryogenic approach will allow the system susceptible to power disruptions, expected in many rural communities in the U.S. and underdeveloped nations. We strongly believe that Phase II MRI magnet will become a model of low-cost, easy-to-operate MRI magnets suitable for rural and underdeveloped region. The technologies accumulated in the project will also promote the application of MgB 2 for MRI magnets of even higher field competitive to the current state-of-the-art NbTi magnets, but with substantially lower costs, enhanced stability, and without reliance on liquid helium supply.

Public Health Relevance

The specific aim of this 2-phase renewal project is to complete, at the conclusion of Phase II, a whole-body fully functional MRI magnet that will become a model for low-cost and liquid-helium-free commercial units for small hospitals, rural communities, and underdeveloped nations. These MRI magnets should contribute to early detection and efficient treatment of disease and injury among a large mass of humanity. They would also contribute to reduced health care costs in the U.S.

Agency
National Institute of Health (NIH)
Institute
National Institute of Biomedical Imaging and Bioengineering (NIBIB)
Type
Research Project (R01)
Project #
2R01EB002887-04A2
Application #
7783654
Study Section
Biomedical Imaging Technology Study Section (BMIT)
Program Officer
Liu, Guoying
Project Start
2003-09-30
Project End
2012-08-31
Budget Start
2009-09-30
Budget End
2010-08-31
Support Year
4
Fiscal Year
2009
Total Cost
$682,912
Indirect Cost
Name
Massachusetts Institute of Technology
Department
Type
Organized Research Units
DUNS #
001425594
City
Cambridge
State
MA
Country
United States
Zip Code
02139
Ling, Jiayin; Voccio, John P; Hahn, Seungyong et al. (2017) A persistent-mode 0.5 T solid-nitrogen-cooled MgB2 magnet for MRI. Supercond Sci Technol 30:
Iwasa, Yukikazu (2017) Towards Liquid-Helium-Free, Persistent-Mode MgB2MRI Magnets: FBML Experience. Supercond Sci Technol 30:
Voccio, John; Hahn, Seungyong; Park, Dong Keun et al. (2013) Magic-Angle-Spinning NMR Magnet Development: Field Analysis and Prototypes. IEEE Trans Appl Supercond 23:
Park, Dong Keun; Hahn, Seungyong; Bascuñán, Juan et al. (2011) Active Protection of an MgB(2) Test Coil. IEEE Trans Appl Supercond 21:2402-2405
Yao, Weijun; Bascuñán, Juan; Hahn, Seungyong et al. (2009) A Superconducting Joint Technique for MgB(2) Round Wires. IEEE Trans Appl Supercond 19:2261-2264
Yao, Weijun; Bascunan, Juan; Kim, Woo-Seok et al. (2008) A Solid Nitrogen Cooled MgB(2) ""Demonstration"" Coil for MRI Applications. IEEE Trans Appl Supercond 18:912-915