A highly flexible catheter with forward-looking, volumetric ultrasound imaging array at its tip would be invaluable for guiding interventions in totally occluded arteries and in the heart. While new catheter designs have been developed, current Intravascular ultrasound (IVUS) and intra cardiac echocardiography (ICE) systems are either side-looking or do not generate the true volumetric images directly in front of the catheter. A donut disk shaped ultrasound imaging array with a hollow center allowing for guidewire and other intervention tools can provide volumetric imaging capability in front of the catheter with small number of electrical connection using synthetic aperture beamforming methods. We use capacitive micromachined ultrasonic transducer (CMUT) technology in an innovative way to form these 2-D arrays with separate transmit and receive elements. This approach not only results in simpler electronics, but allows one to shape and locate the array elements on the available silicon area to increase transmit power, imaging speed and possibly reduce cross-talk. As important, our research shows that one can integrate all the required transmit and receive electronics on the same silicon chip as the CMUT array. This approach eliminates the large number of chip-to- chip electrical connections and enables direct interface to a reduced number of cables (10-12) in a catheter with a simple flex-tape interconnect. In addition to these manufacturing advantages, the extremely low profile of the fully integrated CMUT array - essentially a 1mm thick disk -- will result in flexible structures to navigate through tortuous arteries and should be easier to integrate to a variety of existing deflectable guide catheters. In this project, we will develop single chip CMUT arrays with fully integrated electronics on 1.5mm and 2.5mm diameter hollow silicon chips operating at 10-20MHz frequency range for forward-looking IVUS and ICE applications. The integrated CMOS electronics will be low-power (<150mW) and will feature integrated temperature sensing for safe operation. We will explore the potential of this approach for improved image quality through novel array designs. We will form catheter tips with CMUT arrays and characterize their performance on custom imaging targets with direct comparison to existing side-looking IVUS catheters. We expect this study to be an important step in translating CMUT technology to clinical settings for cardiology applications.

Public Health Relevance

This study will develop ultimately miniaturized ultrasonic imaging devices that can be attached at the tip of a catheter to guide interventions in coronary arteries and in the heart by providing a volumetric image directly in front of the catheter. This will help increase the success rate of interventions especially in totally blocked arteries and trans- catheter operations in the heart.

Agency
National Institute of Health (NIH)
Institute
National Institute of Biomedical Imaging and Bioengineering (NIBIB)
Type
Research Project (R01)
Project #
1R01EB010070-01A1
Application #
7987184
Study Section
Biomedical Imaging Technology Study Section (BMIT)
Program Officer
Lopez, Hector
Project Start
2010-08-01
Project End
2013-07-31
Budget Start
2010-08-01
Budget End
2011-07-31
Support Year
1
Fiscal Year
2010
Total Cost
$483,861
Indirect Cost
Name
Georgia Institute of Technology
Department
Engineering (All Types)
Type
Schools of Engineering
DUNS #
097394084
City
Atlanta
State
GA
Country
United States
Zip Code
30332
Xu, Toby; Tekes, Coskun; Degertekin, F (2014) CMUTs with high-K atomic layer deposition dielectric material insulation layer. IEEE Trans Ultrason Ferroelectr Freq Control 61:2121-31
Gurun, Gokce; Tekes, Coskun; Zahorian, Jaime et al. (2014) Single-chip CMUT-on-CMOS front-end system for real-time volumetric IVUS and ICE imaging. IEEE Trans Ultrason Ferroelectr Freq Control 61:239-50
Satir, Sarp; Zahorian, Jaime; Degertekin, F Levent (2013) A large-signal model for CMUT arrays with arbitrary membrane geometry operating in non-collapsed mode. IEEE Trans Ultrason Ferroelectr Freq Control 60:2426-39
Gurun, Gokce; Hochman, Michael; Hasler, Paul et al. (2012) Thermal-mechanical-noise-based CMUT characterization and sensing. IEEE Trans Ultrason Ferroelectr Freq Control 59:1267-75
Satir, Sarp; Degertekin, F Levent (2012) Harmonic reduction in capacitive micromachined ultrasonic transducers by gap feedback linearization. IEEE Trans Ultrason Ferroelectr Freq Control 59:50-9
Gurun, Gokce; Zahorian, Jaime S; Sisman, Alper et al. (2012) An analog integrated circuit beamformer for high-frequency medical ultrasound imaging. IEEE Trans Biomed Circuits Syst 6:454-67
Tekes, Coskun; Zahorian, Jaime; Gurun, Gokce et al. (2012) Volumetric imaging using single chip integrated CMUT-on-CMOS IVUS array. Conf Proc IEEE Eng Med Biol Soc 2012:3195-8
Perng, John Kangchun; Lee, Seungjun; Kundu, Kousik et al. (2012) Ultrasound imaging of oxidative stress in vivo with chemically-generated gas microbubbles. Ann Biomed Eng 40:2059-68
Tekes, Coskun; Karaman, Mustafa; Degertekin, F Levent (2011) Optimizing circular ring arrays for forward-looking IVUS imaging. IEEE Trans Ultrason Ferroelectr Freq Control 58:2596-607
Gurun, Gokce; Hasler, Paul; Degertekin, F (2011) Front-end receiver electronics for high-frequency monolithic CMUT-on-CMOS imaging arrays. IEEE Trans Ultrason Ferroelectr Freq Control 58:1658-68

Showing the most recent 10 out of 11 publications