An estimated 33,190 new cases of primary liver cancer and an even larger number of new cases of metastatic cancer to the liver will be diagnosed in the United States in 2014. Eradicating those tumors improves patient survival. Percutaneous radiofrequency ablation (RFA), which kills tumors via thermal damage, is a minimally invasive treatment appropriate for the many patients who are not eligible for surgical resection, particularly those with certain tumor type, location, or size; poor liver function; or oher comorbidities. However, technical limitations have precluded broader adoption of RFA as a means of eliminating liver tumors. Tumors in some portions of the liver cannot be accessed because the straight paths currently taken by RFA electrodes would traverse vasculature, lung, or other sensitive structures. Large tumors require multiple electrode insertions; the increased bleeding risk with each puncture through the liver capsule can be too great in patients with advanced liver disease or severe comorbidities. The long-term goal of this work is to significantly improve access, accuracy, and precision during percutaneous liver RFA procedures using robot-assisted needle steering. The following specific aims will enable the development of this technology and demonstrate feasibility, as a path to clinical adoption:
Specific Aim 1 : Optimize ultrasound-based localization of highly curved needles and closed-loop control of robotic needle steering.
Specific Aim 2 : Develop an interactive user control interface and enable teleoperated needle steering intervention.
Specific Aim 3 : Design a clinical robot-assisted needle steering system for percutaneous liver RFA, validated in an ex vivo liver model.
Specific Aim 4 : Validate the ultrasound-guided needle steering system in vivo in porcine liver. Needle steering enables the insertion of highly flexible needles or guidewires along controlled, curved, 3D paths through tissue. Thus, the needle can be actively steered to acquire tumors not accessible by a straight- line path, and unexpected deviations from the desired path can be corrected as the needle advances toward the tumor. A functional needle steering system appropriate for in vivo experimentation must be compatible with widely available medical imaging (here, ultrasound imaging), have the ability to deliver treatment (here, RFA through the use of a steerable needle electrode), and an appropriate user interface including visualization and human-in-the-loop teleoperation. This technology could extend the survival advantages of RFA to patients who may otherwise not have good treatment options, and in the long term, be used for accurate placement of diagnostic devices and treatment of diseases in other organs.

Public Health Relevance

The design and image-guided control of extremely minimally invasive robotic instruments for diagnosis and therapy will address a wide variety of diseases for which treatment options are currently limited. This work will ultimately increase the accuracy and reduce the invasiveness of interventional radiology and surgical procedures, resulting in better patient outcomes that lead to improved health and quality of life.

Agency
National Institute of Health (NIH)
Institute
National Institute of Biomedical Imaging and Bioengineering (NIBIB)
Type
Research Project (R01)
Project #
5R01EB018849-02
Application #
8934104
Study Section
Special Emphasis Panel (ZRG1)
Program Officer
Krosnick, Steven
Project Start
2014-09-26
Project End
2018-05-31
Budget Start
2015-06-01
Budget End
2016-05-31
Support Year
2
Fiscal Year
2015
Total Cost
Indirect Cost
Name
Stanford University
Department
Engineering (All Types)
Type
Biomed Engr/Col Engr/Engr Sta
DUNS #
009214214
City
Stanford
State
CA
Country
United States
Zip Code
94304
Morimoto, Tania K; Greer, Joseph D; Hawkes, Elliot W et al. (2018) Toward the Design of Personalized Continuum Surgical Robots. Ann Biomed Eng 46:1522-1533
Greer, Joseph D; Morimoto, Tania K; Okamura, Allison M et al. (2017) Series Pneumatic Artificial Muscles (sPAMs) and Application to a Soft Continuum Robot. IEEE Int Conf Robot Autom 2017:5503-5510
Morimoto, Tania K; Cerrolaza, Juan J; Hsieh, Michael H et al. (2017) Design of patient-specific concentric tube robots using path planning from 3-D ultrasound. Conf Proc IEEE Eng Med Biol Soc 2017:165-168
Morimoto, Tania K; Hawkes, Elliot Wright; Okamura, Allison M (2017) Design of a Compact Actuation and Control System for Flexible Medical Robots. IEEE Robot Autom Lett 2:1579-1585
Gerboni, Giada; Greer, Joseph D; Laeseke, Paul F et al. (2017) Highly Articulated Robotic Needle Achieves Distributed Ablation of Liver Tissue. IEEE Robot Autom Lett 2:1367-1374
Morimoto, Tania K; Greer, Joseph D; Hsieh, Michael H et al. (2016) Surgeon Design Interface for Patient-Specific Concentric Tube Robots. Proc IEEE RAS EMBS Int Conf Biomed Robot Biomechatron 2016:41-48
Adebar, Troy K; Greer, Joseph D; Laeseke, Paul F et al. (2016) Methods for Improving the Curvature of Steerable Needles in Biological Tissue. IEEE Trans Biomed Eng 63:1167-77
Morimoto, Tania K; Okamura, Allison M (2016) Design of 3-D Printed Concentric Tube Robots. IEEE Trans Robot 32:1419-1430
Cabreros, Sarah S; Jimenez, Nina M; Greer, Joseph D et al. (2015) Remote Electromagnetic Vibration of Steerable Needles for Imaging in Power Doppler Ultrasound. IEEE Int Conf Robot Autom 2015:2244-2249
Adebar, Troy K; Fletcher, Ashley E; Okamura, Allison M (2014) 3-D ultrasound-guided robotic needle steering in biological tissue. IEEE Trans Biomed Eng 61:2899-910