Percutaneous interventions are now the primary means of managing coronary artery disease, where over one million procedures, including over 500,000 coronary stents, were performed during 1999. Despite these advances, restenosis continues to be a major limitation of percutaneous coronary revascularization procedures. Even in the best cardiac catheterization labs between 10-20 percent of treated lesions must be revascularized. Intravascular ultrasound (IVUS) is routinely used in many of these laboratories to guide procedures. Although image quality has improved steadily, still only about 7-8 percent of total procedures use this technology. The primary reason for this low rate is that an IVUS study can add appreciable time to a procedure without significantly improving the outcome. This will change only when IVUS can efficiently guide interventions with improved outcomes. The long range goal of this research program remains to manage nearly every aspect of coronary artery interventions with intravascular ultrasound (IVUS). It focuses on the common mechanical interventions of balloon angioplasty (PCTA) and endovascular stenting. However, the methods are general and can apply to other procedures such as ablation/vaporization and brachytherapy. Based on progress during the initial funding period, it now appears that IVUS can provide key information about anatomical and elastic properties of the artery wall flow and flow dynamics within the lumen. Given these developments, an ambitious research plan has been developed to address how IVUS can help manage nearly every aspect of coronary artery interventions. For the mechanical interventions of balloon angioplasty and endovascular stenting, the applicants hypothesize that IVUS can identify the mechanical properties of arterial lesions, guide and monitor both PCTA and stent deployment to minimize tissue injury while insuring full stent extensions, assess flow dynamics pre- and post-interventions, and determine the likelihood of restenosis. In addition, an integrated IVUS delivery will be constructed to perform mechanical interventions under full ultrasound guidance, including real-time elasticity and flow monitoring. Such a catheter is key to optimizing stent deployment while minimizing tissue injury and subsequent restenosis. In addition, an integrated device can dramatically reduce the number of catheters employed during a typical procedure.

Agency
National Institute of Health (NIH)
Institute
National Heart, Lung, and Blood Institute (NHLBI)
Type
Research Project (R01)
Project #
2R01HL047401-05
Application #
6200706
Study Section
Diagnostic Imaging Study Section (DMG)
Project Start
1996-02-01
Project End
2004-06-30
Budget Start
2000-07-30
Budget End
2001-06-30
Support Year
5
Fiscal Year
2000
Total Cost
$340,507
Indirect Cost
Name
University of Michigan Ann Arbor
Department
Biomedical Engineering
Type
Schools of Engineering
DUNS #
791277940
City
Ann Arbor
State
MI
Country
United States
Zip Code
48109
Jia, Congxian; Olafsson, Ragnar; Kim, Kang et al. (2009) Two-dimensional strain imaging of controlled rabbit hearts. Ultrasound Med Biol 35:1488-501
Yeh, David T; Oralkan, Omer; Wygant, Ira O et al. (2006) 3-D ultrasound imaging using a forward-looking CMUT ring array for intravascular/intracardiac applications. IEEE Trans Ultrason Ferroelectr Freq Control 53:1202-11
Zohdy, Marwa J; Tse, Christine; Ye, Jing Yong et al. (2006) Optical and acoustic detection of laser-generated microbubbles in single cells. IEEE Trans Ultrason Ferroelectr Freq Control 53:117-25
Choi, Charles D; Savage, James; Stephens, Douglas N et al. (2005) An integrated semicompliant balloon ultrasound catheter for quantitative feedback and image guidance during stent deployment. IEEE Trans Ultrason Ferroelectr Freq Control 52:1498-503
O'Donnell, Matthew; Wang, Yao (2005) Coded excitation for synthetic aperture ultrasound imaging. IEEE Trans Ultrason Ferroelectr Freq Control 52:171-6
Tse, Christine; Zohdy, Marwa J; Ye, Jing Yong et al. (2005) Acoustic detection of controlled laser-induced microbubble creation in gelatin. IEEE Trans Ultrason Ferroelectr Freq Control 52:1962-9
Shi, Yan; de Ana, F Javier; Chetcuti, Stanley J et al. (2005) Motion artifact reduction for IVUS-based thermal strain imaging. IEEE Trans Ultrason Ferroelectr Freq Control 52:1312-9
Chen, X; Xie, H; Erkamp, R et al. (2005) 3-D correlation-based speckle tracking. Ultrason Imaging 27:21-36
Aglyamov, Salavat; Skovoroda, Andrei R; Rubin, Jonathan M et al. (2004) Model-based reconstructive elasticity imaging of deep venous thrombosis. IEEE Trans Ultrason Ferroelectr Freq Control 51:521-31
Kim, Kang; Weitzel, W F; Rubin, J M et al. (2004) Vascular intramural strain imaging using arterial pressure equalization. Ultrasound Med Biol 30:761-71

Showing the most recent 10 out of 26 publications