Angioplasty and stenting for peripheral artery disease (PAD) of the femoropopliteal artery segment, consisting of the superficial femoral artery (SFA) and popliteal artery (PA), carries the highest rate of reconstruction failure primarily because it undergoes large deformations during flexion of the limb. Our preliminary data demonstrate that previously published limb-induced deformations of the SFA and PA are markedly underestimated, and that certain stent designs are not able to accommodate these severe deformations. We propose to precisely quantify the mechanical environments of the SFA and PA in order to determine the optimal patient and lesion- specific stent for the SFA and PA. This will be accomplished through 3 Specific Aims.
In Aim 1 we will determine the 3D bending, torsion and compression of the SFA and PA as a result of limb flexion in human cadavers using our new intra-arterial marker technique, CTA, and image analysis.
In Aim 2 we will determine the biaxial mechanical properties of SFA and PA from human tissue donors with PAD, along with the mechanical properties of 5 commonly used self-expanding nitinol PAD stents.
In Aim 3 we will use the data on femoropopliteal artery flexions (Aim 1) and SFA, PA and PAD stent mechanical properties (Aim 2), to build a computational model of the stented SFA and PA. This model will then be subjected to limb flexion induced deformations to determine the mechanical stress resulting from the interaction of the stent with the artery. A comparison of each of the 5 stents under identical conditions, including a systematic study of the effects of age, diabetes and lesion calcification on these mechanical stresses, will allow identification of the optimal stet for the SFA and PA in patients with different clinical and lesion characteristics. The capability o our model to predict areas where restenosis will occur in the stented SFA/PA will for the first time be clinically validated in PAD patients by comparing the areas of high stress in the patient-specific models to the areas of restenosis visualized by CTA 6 months after stenting. The ability to rationally select patient and lesion-specific stents for the SFA and PA will produce more durable reconstructions and have an immediate direct translational impact benefiting PAD patients with claudication and critical limb ischemia. Our precise description of the human SFA and PA mechanical environments will greatly advance our knowledge of PAD pathophysiology and will allow the development of a better stent for the SFA and PA. By creating vital, currently unavailable computational model input data and taking the initial steps towards clinical validation, our study will serve as a foundation for larger-scale, more cost-effective in silico comparative effectiveness studies of current and future PAD stents and help advance the new paradigm of patient-specific modeling and medicine.

Public Health Relevance

Balloon angioplasty and stenting for peripheral artery disease has the highest rate of failure. We propose to use real human arteries, stents, and computational modeling to help determine the optimal patient and disease-specific stents that produce the best clinical outcomes. This will result in more durable reconstructions for patients with peripheral artery disease and help conserve vital healthcare resources.

Agency
National Institute of Health (NIH)
Institute
National Heart, Lung, and Blood Institute (NHLBI)
Type
Research Project (R01)
Project #
5R01HL125736-03
Application #
9173465
Study Section
Bioengineering, Technology and Surgical Sciences Study Section (BTSS)
Program Officer
Reid, Diane M
Project Start
2014-12-01
Project End
2019-10-31
Budget Start
2016-11-01
Budget End
2017-10-31
Support Year
3
Fiscal Year
2017
Total Cost
Indirect Cost
Name
University of Nebraska Medical Center
Department
Surgery
Type
Schools of Medicine
DUNS #
168559177
City
Omaha
State
NE
Country
United States
Zip Code
68198
Maleckis, Kaspars; Anttila, Eric; Aylward, Paul et al. (2018) Nitinol Stents in the Femoropopliteal Artery: A Mechanical Perspective on Material, Design, and Performance. Ann Biomed Eng 46:684-704
Kamenskiy, Alexey; Poulson, William; Sim, Sylvie et al. (2018) Prevalence of Calcification in Human Femoropopliteal Arteries and its Association with Demographics, Risk Factors, and Arterial Stiffness. Arterioscler Thromb Vasc Biol 38:e48-e57
Poulson, William; Kamenskiy, Alexey; Seas, Andreas et al. (2018) Limb flexion-induced axial compression and bending in human femoropopliteal artery segments. J Vasc Surg 67:607-613
MacTaggart, Jason; Poulson, William; Seas, Andreas et al. (2018) Stent Design Affects Femoropopliteal Artery Deformation. Ann Surg :
Desyatova, Anastasia; MacTaggart, Jason; Romarowski, Rodrigo et al. (2018) Effect of aging on mechanical stresses, deformations, and hemodynamics in human femoropopliteal artery due to limb flexion. Biomech Model Mechanobiol 17:181-189
Kamenskiy, Alexey; Seas, Andreas; Deegan, Paul et al. (2017) Constitutive description of human femoropopliteal artery aging. Biomech Model Mechanobiol 16:681-692
Desyatova, Anastasia; MacTaggart, Jason; Poulson, William et al. (2017) The choice of a constitutive formulation for modeling limb flexion-induced deformations and stresses in the human femoropopliteal arteries of different ages. Biomech Model Mechanobiol 16:775-785
Desyatova, Anastasia; MacTaggart, Jason; Kamenskiy, Alexey (2017) Constitutive modeling of human femoropopliteal artery biaxial stiffening due to aging and diabetes. Acta Biomater 64:50-58
Maleckis, Kaspars; Deegan, Paul; Poulson, William et al. (2017) Comparison of femoropopliteal artery stents under axial and radial compression, axial tension, bending, and torsion deformations. J Mech Behav Biomed Mater 75:160-168
Desyatova, Anastasia; Poulson, William; Deegan, Paul et al. (2017) Limb flexion-induced twist and associated intramural stresses in the human femoropopliteal artery. J R Soc Interface 14:

Showing the most recent 10 out of 17 publications