Airborne chemical and biological hazards contribute substantially to our nation's occupational disease burden. And yet, the resources needed to monitor workforce exposure to these hazards are scarce. Ironically, while the cost of healthcare (and worker's compensation) is on the rise, both private and federal investment in industrial hygiene and workforce protection is on the decline. In the absence of (and bleak outlook for) renewed funding to ensure worker health, our field must strive to become dramatically more effective in light of diminishing resources. Therefore, a need exists to improve the efficiency, timeliness, and cost-effectiveness of workplace hazard surveillance. This project will develop and synergize innovative technologies to address that need. This project aims to advance the state-of-the-art in aerosol exposure measurement. Our field has relied for too long on an outdated, inefficient, and expensive paradigm that often leads to inadequate hazard surveillance. Our overarching hypothesis is that the high cost of air sampling/analysis is a limiting factor in our ability to protect worker health. These costs (literally hundreds of dollarsper measurement) preclude day-to-day industrial hygiene efforts, they limit regulatory enforcement, and they stifle the development of credible epidemiology; the latter, in turn, hinders our ability o develop new exposure guidelines (and interventions) that protect worker health. The objective of this work, therefore, is to develop personal air sampling and analysis technologies (pump, sampler, and in-field chemical assays) so that workplace air monitoring can become more cost-effective, timely, and representative. This research will develop technology that reduces the cost of workplace air monitoring by over an order of magnitude and the time from sampling to hazard communication from weeks to hours. As a result, this project has the potential to break a long-held paradigm of inefficient and expensive hazard surveillance. By enabling more efficient, low-cost monitoring, these technologies will allow occupational health researchers to survey hazards (and prevent disease) on a wider scale and across virtually every NORA sector. In the developing world, this technology could empower a rebirth of industrial hygiene in many developing (and very unsafe) industrial sectors.
Airborne chemical and biological hazards contribute substantially to our nation's occupational disease burden. And yet, the resources needed to monitor workforce exposure to these hazards are scarce. The objective of this research is to develop personal air sampling and analysis technologies (pump, sampler, and in-field chemical assays) so that workplace air monitoring can become more cost-effective, timely, and representative.
| Quinn, Casey; Miller-Lionberg, Daniel D; Klunder, Kevin J et al. (2018) Personal Exposure to PM2.5 Black Carbon and Aerosol Oxidative Potential using an Automated Microenvironmental Aerosol Sampler (AMAS). Environ Sci Technol 52:11267-11275 |
| Kim, Yong Shin; Yang, Yuanyuan; Henry, Charles S (2018) Laminated and infused Parafilm® - paper for paper-based analytical devices. Sens Actuators B Chem 255:3654-3661 |
| Yamada, Kentaro; Citterio, Daniel; Henry, Charles S (2018) ""Dip-and-read"" paper-based analytical devices using distance-based detection with color screening. Lab Chip 18:1485-1493 |
| Boehle, Katherine E; Gilliand, Jake; Wheeldon, Christopher R et al. (2017) Utilizing Paper-Based Devices for Antimicrobial-Resistant Bacteria Detection. Angew Chem Int Ed Engl 56:6886-6890 |
| Volckens, J; Quinn, C; Leith, D et al. (2017) Development and evaluation of an ultrasonic personal aerosol sampler. Indoor Air 27:409-416 |
| Mettakoonpitak, Jaruwan; Miller-Lionberg, Dan; Reilly, Thomas et al. (2017) Low-Cost Reusable Sensor for Cobalt and Nickel Detection in Aerosols Using Adsorptive Cathodic Square-Wave Stripping Voltammetry. J Electroanal Chem (Lausanne) 805:75-82 |
| Klunder, Kevin J; Nilsson, Zach; Sambur, Justin B et al. (2017) Patternable Solvent-Processed Thermoplastic Graphite Electrodes. J Am Chem Soc 139:12623-12631 |
| Adkins, Jaclyn A; Boehle, Katherine; Friend, Colin et al. (2017) Colorimetric and Electrochemical Bacteria Detection Using Printed Paper- and Transparency-Based Analytic Devices. Anal Chem 89:3613-3621 |
| Meredith, Nathan A; Quinn, Casey; Cate, David M et al. (2016) Paper-based analytical devices for environmental analysis. Analyst 141:1874-87 |
| Adkins, Jaclyn A; Noviana, Eka; Henry, Charles S (2016) Development of a Quasi-Steady Flow Electrochemical Paper-Based Analytical Device. Anal Chem 88:10639-10647 |
