Over 800,000 injuries to ligaments, tendons and the joint capsule occur every year in the U.S.A. While suturing is an alternative to treat ligaments'and tendons'injuries, it is not always successful because of the natural tissues'limited vascularization. As an option to this problem, grafts and prostheses are used to reconstruct these tissues. The Anterior Cruciate Ligament (ACL), an intra-articular ligament that contributes to the kinematics and stability of the knee, is commonly torn or ruptured in athletes and people practicing demanding activities. The approaches to ACL reconstruction include the use of autografts, allografts and prostheses, but these choices present shortcomings. In spite of these drawbacks, U.S. doctors performed an estimated 200,000 reconstructive surgeries in 2006. To overcome current limitations on treating ligament and tendon injuries like a torn ACL, the long term research objective of this proposal is to develop artificial ligaments and tendons that will mimic the properties of these human tissues. Since the mechanical properties of the materials selected to perform this project contrast significantly with those of the materials used in currently available prostheses, we expect to develop artificial ligaments and tendons with enhanced properties and closer resemblance to natural tissues. To achieve the long term research objective, three specific aims are proposed: 1) selection of polymers and investigation of the effect that secondary structures have on the properties of electrospun polymer nanofibers (EPN), 2) incorporation of carbon nanoparticles to the EPN to enhance their mechanical properties and 3) cell seeding to assess biological compatibility. These studies will investigate the electrospinning conditions of biocompatible polyurethanes to obtain micro- and nanofibers, which will be assembled into specific secondary structures to resemble ligaments and tendons. These assemblies will be extensively characterized, allowing us to design the targeted applications. Furthermore, carbon nanotubes and carbon nanofibers will be incorporated into the EPN to enhance the mechanical properties of the assemblies formed. Finally, studies on fibroblasts seeding and proliferation on the assemblies will examine the biological compatibility and potential for using the proposed structures as artificial ligaments and tendons. This project will investigate the hypothesis that certain synthetic polymers can be electrospun into micro- and nanofibers and assembled into specific secondary structures, which will possess mechanical properties similar to natural ligaments and tendons. Furthermore, we hypothesize that the mechanical properties of these secondary structures will be enhanced by incorporation of carbon nanoparticles. This project is innovative because it combines the use of certain polyurethanes (not explored for the proposed applications) through electrospinning to design prostheses. In addition to the unique combination of materials and technique proposed, the prosthetic ligaments and tendons targeted are potentially superior to the materials currently in use.

Public Health Relevance

More than 800,000 injuries to ligaments, tendons and the joint capsule occur every year in the U.S.A., and many of these injuries require reconstructive surgery. The objective of this project is to develop artificial ligaments and tendons for potential prostheses, which could impact the public health.

Agency
National Institute of Health (NIH)
Institute
National Institute on Aging (NIA)
Type
Pilot Research Project (SC2)
Project #
5SC2AG036825-03
Application #
8129730
Study Section
Special Emphasis Panel (ZGM1-MBRS-X (CH))
Program Officer
Williams, John
Project Start
2009-09-01
Project End
2013-08-31
Budget Start
2011-09-01
Budget End
2013-08-31
Support Year
3
Fiscal Year
2011
Total Cost
$138,028
Indirect Cost
Name
University of Texas-Pan American
Department
Chemistry
Type
Schools of Arts and Sciences
DUNS #
069444511
City
Edinburg
State
TX
Country
United States
Zip Code
78539
Sheikh, Faheem A; Macossay, Javier; Cantu, Travis et al. (2015) Imaging, spectroscopy, mechanical, alignment and biocompatibility studies of electrospun medical grade polyurethane (Carbothane™ 3575A) nanofibers and composite nanofibers containing multiwalled carbon nanotubes. J Mech Behav Biomed Mater 41:189-98
Macossay, Javier; Sheikh, Faheem A; Cantu, Travis et al. (2014) Imaging, Spectroscopic, Mechanical and Biocompatibility Studies of Electrospun Tecoflex(®) EG 80A Nanofibers and Composites Thereof Containing Multiwalled Carbon Nanotubes. Appl Surf Sci 321:205-213
Leyva-Porras, César; Ornelas-Gutiérrez, C; Miki-Yoshida, M et al. (2014) EELS Analysis of Nylon 6 Nanofibers Reinforced with Nitroxide-Functionalized Graphene Oxide. Carbon N Y 70:164-171
Diaz-Gomez, Luis; Alvarez-Lorenzo, Carmen; Concheiro, Angel et al. (2014) Biodegradable electrospun nanofibers coated with platelet-rich plasma for cell adhesion and proliferation. Mater Sci Eng C Mater Biol Appl 40:180-8
Avila-Vega, Yazmin I; Leyva-Porras, Cesar C; Mireles, Marcela et al. (2013) Nitroxide-Functionalized Graphene Oxide from Graphite Oxide. Carbon N Y 63:
Sheikh, Faheem A; Macossay, Javier; Kanjwal, Muzafar A et al. (2012) Titanium Dioxide Nanofibers and Microparticles Containing Nickel Nanoparticles. ISRN Nanomater 2012:
Sheikh, F A; Kanjwal, M A; Macossay, J et al. (2012) A simple approach for synthesis, characterization and bioactivity of bovine bones to fabricate the polyurethane nanofiber containing hydroxyapatite nanoparticles. Express Polym Lett 6:
Sheikh, Faheem A; Cantu, Travis; Macossay, Javier et al. (2011) Fabrication of Poly(vinylidene fluoride) (PVDF) Nanofibers Containing Nickel Nanoparticles as Future Energy Server Materials. Sci Adv Mater 3:
Sheikh, Faheem A; Kanjwal, Muzafar A; Macossay, Javier et al. (2011) Fabrication of Mineralized Collagen from Bovine Waste Materials by Hydrothermal Method as Promised Biomaterials. J Biomater Tissue Eng 1:
Pelfrey, Sean; Cantu, Travis; Papantonakis, Michael R et al. (2010) Microscopic and Spectroscopic Studies of Thermally Enhanced Electrospun PMMA Micro- and Nanofibers. J Polym Sci A Polym Chem 1:866-869