Primarily due to an aging population, the number of orthopedic surgeries performed each year is steadily increasing. Reduction and fixation of fractures due to osteoporosis is now one of the most common surgical procedures performed in the United States. As well, the number of joint replacement surgeries has increased so markedly over the past decade or so that they are now considered relatively routine. As our population continues to age, the ability of our older population to maintain levels of activity associated with satisfactory quality of life as well as to prevent long-term disability and extensive rehabilitations depends on the continued improvement of these orthopaedic surgeries. Minimally invasive surgical techniques, requiring only small incisions, have tremendous potential to decrease operative time, improve patient safety, speed recovery, and yield improved outcomes. Most joint reconstructions and fracture repairs are presently performed entirely without intraoperative imaging except to verify the final result. In minimally invasive surgeries, however, where the opportunity for direct examination is very limited, there is an increased need for intraoperative imaging to verify fracture repair or joint reduction before fixation in order to avoid prolongation of the surgery or the need for a revision surgery at a later time. The goals of the proposed research are to develop novel algorithms for the three-dimensional reconstruction of bone images from mobile C-arm x-ray images and to validate these methods in a clinically realistic setting. The primary novelty of the proposed methods is their exploitation of prior knowledge in the form of prior computed tomography scans when available and a statistical atlas when comPuted tomography scans are not available. Specifically, we propose to: 1) Develop methods to register both prior computed tomography data and a statistical atlas to measured C-arm projections; 2) to develop methods to fuse prior information with observed information for optimal three-dimensional reconstruction; and 3) to build a statistical atlas and validate methods on phantoms and cadavers. The proposed methods will apply immediately on calibrated C-arms that are prevalent in the operating room, and their impact on surgical practice in orthopedics has the potential to be very high.

Agency
National Institute of Health (NIH)
Institute
National Institute of Biomedical Imaging and Bioengineering (NIBIB)
Type
Exploratory/Developmental Grants (R21)
Project #
1R21EB003616-01
Application #
6762536
Study Section
Special Emphasis Panel (ZRR1-BT-2 (01))
Program Officer
Lyster, Peter
Project Start
2004-08-01
Project End
2007-07-31
Budget Start
2004-08-01
Budget End
2005-07-31
Support Year
1
Fiscal Year
2004
Total Cost
$196,878
Indirect Cost
Name
Johns Hopkins University
Department
Engineering (All Types)
Type
Schools of Engineering
DUNS #
001910777
City
Baltimore
State
MD
Country
United States
Zip Code
21218
Sadowsky, Ofri; Lee, Junghoon; Sutter, E Grant et al. (2011) Hybrid cone-beam tomographic reconstruction: incorporation of prior anatomical models to compensate for missing data. IEEE Trans Med Imaging 30:69-83
Ellingsen, Lotta M; Chintalapani, Gouthami; Taylor, Russell H et al. (2010) Robust deformable image registration using prior shape information for atlas to patient registration. Comput Med Imaging Graph 34:79-90
Sadowsky, Ofri; Lee, Junghoon; Sutter, Edward Grant et al. (2009) Enhancement of mobile C-arm cone-beam reconstruction using prior anatomical models. Proc SPIE Int Soc Opt Eng 7258:72585B-72585B12
Sadowsky, Ofri; Chintalapani, Gouthami; Taylor, Russell H (2007) Deformable 2D-3D registration of the pelvis with a limited field of view, using shape statistics. Med Image Comput Comput Assist Interv 10:519-26
Chintalapani, Gouthami; Ellingsen, Lotta M; Sadowsky, Ofri et al. (2007) Statistical atlases of bone anatomy: construction, iterative improvement and validation. Med Image Comput Comput Assist Interv 10:499-506
Sadowsky, Ofri; Cohen, Jonathan D; Taylor, Russell H (2006) Projected tetrahedra revisited: a barycentric formulation applied to digital radiograph reconstruction using higher-order attenuation functions. IEEE Trans Vis Comput Graph 12:461-73
Ramamurthi, Krishnakumar; Strobel, Norbert; Fahrig, Rebecca et al. (2005) Fully truncated cone-beam reconstruction on Pi lines using prior CT. Med Image Comput Comput Assist Interv 8:631-8