Diesel and gasoline exhaust, produced when an engine burns fuel, is a complex mixture of gases and fine particles. Recent studies have linked respiratory diseases and cancer to exposure to gasoline and diesel exhaust. These diseases, however, are also attributed to genetic susceptibility. Establishing a direct linkage of these diseases to diesel and/or gasoline exhaust requires reliable and reproducible quantitative measure of exposure. The overall aim of the proposed collaborative research is to create, evaluate and validate an autonomous/self-contained wearable, approximately 4"""""""" by 4"""""""", sensor array for the real-time monitoring of exposure through inhalation to the gaseous components of internal combustion engine exhaust. The fully integrated light weight sensor that can be worn as badge similar to y-radiation counter will comprise an array of conductometric and amperometric sensors, and low-power fully integrated microelectronics for power management, data collection, and signal processing and wireless communications. Arrays of independent sensors can offer much more analytical information on personal exposure and thus hold a great potential for selective and accurate monitoring of low concentrations of mobile source air toxics and other relevant pollutants in real-time. The conductometric and amperometric platforms have strengths that are complementary to each other and are extremely 1C compatible. Advanced data processing will be used for generating distinct response patterns and detecting the individual compounds in gaseous mixtures. Such judicious integration of two powerful detection schemes along with an intelligent data processing should dramatically increase the gathered information on personal exposure to offer remarkable reliability along with broad scope, while meeting the portability requirements of decentralized detection systems. Our multidisciplinary expertise, extensive preliminary data and successful past collaboration lay the groundwork for the proposed activity. The overall goal will be realized by 1) developing, optimizing, characterizing and testing conductometric nanosensor array, 2) developing, optimizing, characterizing and testing microfabricated amperometric sensor array 3) developing integrated microelectronics for optimal power management, data collection and signal processing and remote communication, 4) integrating conductometric and amperometric sensor arrays in a single platform with incorporated microelectronics and 5) testing and validating the wearable sensor array by monitoring in real-time diesel and gasoline exhausts under realistic exposure conditions.

Agency
National Institute of Health (NIH)
Institute
National Institute of Environmental Health Sciences (NIEHS)
Type
Research Project--Cooperative Agreements (U01)
Project #
3U01ES016026-04S1
Application #
8144671
Study Section
Special Emphasis Panel (ZES1-RAM-D (U1))
Program Officer
Balshaw, David M
Project Start
2007-08-15
Project End
2012-05-31
Budget Start
2010-06-10
Budget End
2012-05-31
Support Year
4
Fiscal Year
2010
Total Cost
$1,000
Indirect Cost
Name
University of California Riverside
Department
Engineering (All Types)
Type
Schools of Engineering
DUNS #
627797426
City
Riverside
State
CA
Country
United States
Zip Code
92521
Hernandez, S C; Hangarter, C M; Mulchandani, A et al. (2012) Selective recognition of xylene isomers using ZnO-SWNTs hybrid gas sensors. Analyst 137:2549-52
Shirsat, Mahendra D; Sarkar, Tapan; Kakoullis Jr, James et al. (2012) Porphyrins-Functionalized Single-Walled Carbon Nanotubes Chemiresistive Sensor Arrays for VOCs. J Phys Chem C Nanomater Interfaces 116:3845-3850
Lim, Jae-Hong; Mulchandani, Ashok; Myung, Nosang V (2012) Single-walled carbon nanotubes based chemicapacitive sensors. J Nanosci Nanotechnol 12:1517-20
Paul, Rajat Kanti; Badhulika, Sushmee; Saucedo, Nuvia M et al. (2012) Graphene nanomesh as highly sensitive chemiresistor gas sensor. Anal Chem 84:8171-8
Paul, Rajat K; Badhulika, Sushmee; Niyogi, Sandip et al. (2011) The production of oxygenated polycrystalline graphene by one-step ethanol-chemical vapor deposition. Carbon N Y 49:3789-3795
Tlili, Chaker; Myung, Nosang V; Shetty, Vivek et al. (2011) Label-free, chemiresistor immunosensor for stress biomarker cortisol in saliva. Biosens Bioelectron 26:4382-6
Das, Basanta K; Tlili, Chaker; Badhulika, Sushmee et al. (2011) Single-walled carbon nanotubes chemiresistor aptasensors for small molecules: picomolar level detection of adenosine triphosphate. Chem Commun (Camb) 47:3793-5
McNicholas, Thomas P; Zhao, Kang; Yang, Changheng et al. (2011) Sensitive Detection of Elemental Mercury Vapor by Gold Nanoparticle Decorated Carbon Nanotube Sensors. J Phys Chem C Nanomater Interfaces 115:13927-13931
Cella, Lakshmi N; Chen, Wilfred; Myung, Nosang V et al. (2010) Single-walled carbon nanotube-based chemiresistive affinity biosensors for small molecules: ultrasensitive glucose detection. J Am Chem Soc 132:5024-6
Shirale, Dhammanand J; Bangar, Mangesh A; Park, Miso et al. (2010) Label-free chemiresistive immunosensors for viruses. Environ Sci Technol 44:9030-5

Showing the most recent 10 out of 17 publications