Proton therapy for cancer treatment has gained much recognition and attracted great interest in recent years as evidenced by the increasing number of proton radiation therapy facilities in the United States and around the world. The reason for this interest is that proton therapy could further improve the results of cancer treatments by applying very conformal dose distributions with less dose delivered to healthy tissues than with even the most advanced photon therapy techniques. Another reason is the promise from industry to develop more compact and less expensive proton technology. One unsolved problem in proton therapy is the current inability to predict the exact range of protons in tissue due to inaccuracy of converting CT Hounsfield units to proton stopping power and the lack of a low-dose imaging modality in the treatment room predicting the range of protons on a day-to-day basis. This is unfortunate, because the major promise of protons is the ability to stop the radiation in front of a critical normal tissue structure positioned behind a tumor. The technological limitation mostly responsible for this uncertainty is the use of x-ray based computed tomography (xCT) for proton treatment planning and the lack of a low-dose modality for daily treatment-room image guidance. The reason for using xCT is its wide availability and established role in radiation therapy treatment planning and image guidance. Here, we are proposing to overcome the current limitations of xCT by using proton computed tomography (pCT) for proton treatment planning and image guidance in the treatment room. With this effort at the interface of physics and medicine, we will leverage our experience of recent years in developing a prototype pCT scanner and advanced image reconstruction methods. We will make the transition from the current prototype scanner to a clinical pCT scanner. The prototype will be used to demonstrate the value of pCT in comparison to x-ray CT (specific aim 1). We will also study the technological limitations of the prototype and, with the help of our collaborators in high energy physics and computer science and engineering, develop a head pCT scanner that is suitable for clinical applications (specific aim 2). Lastly, we will develop engineering concepts with a commercial proton therapy partner and prepare the stage for a controlled technology transfer (specific aim 3). The deliverable of this proposal will be a clinical pCT head scanner for thorough evaluation of the value of pCT for clinical applications in proton therapy and as a low-dose CT imaging modality. If successful, this research and development will shift the current paradigm that proton treatment planning can only be based on x-ray CT, toward the use of more accurate pCT-based planning and pCT-image guided proton therapy. This will open the door for entirely new clinical proton treatment protocols to be tested in clinical trials.

Public Health Relevance

Proton therapy is an attractive form of cancer treatment that could further improve local control and survival by applying very conformal dose distributions with fewer doses delivered to healthy tissues than with even the most advanced photon therapy techniques. One unsolved problem in proton therapy is the current inability to predict the exact range of protons in tissue due to inaccuracy of converting CT Hounsfield units to proton stopping power and the lack of a low-dose imaging modality in the treatment room predicting the range of protons on a day-to-day basis. This proposal aims to develop, test and translate technology borrowed from high energy physics for 3D tomographic imaging with protons (proton CT) to minimize these uncertainties and to provide a low-dose imaging modality in the treatment room, and thereby improve proton therapy.

Agency
National Institute of Health (NIH)
Institute
National Institute of Biomedical Imaging and Bioengineering (NIBIB)
Type
Research Project (R01)
Project #
1R01EB013118-01
Application #
8076009
Study Section
Special Emphasis Panel (ZRG1-BST-E (50))
Program Officer
Lopez, Hector
Project Start
2011-04-01
Project End
2015-01-31
Budget Start
2011-04-01
Budget End
2012-01-31
Support Year
1
Fiscal Year
2011
Total Cost
$505,861
Indirect Cost
Name
Loma Linda University
Department
Radiation-Diagnostic/Oncology
Type
Schools of Medicine
DUNS #
009656273
City
Loma Linda
State
CA
Country
United States
Zip Code
92350
Volz, Lennart; Piersimoni, Pierluigi; Bashkirov, Vladimir A et al. (2018) The impact of secondary fragments on the image quality of helium ion imaging. Phys Med Biol 63:195016
Piersimoni, P; Ramos-Méndez, J; Geoghegan, T et al. (2017) The effect of beam purity and scanner complexity on proton CT accuracy. Med Phys 44:284-298
Giacometti, V; Guatelli, S; Bazalova-Carter, M et al. (2017) Development of a high resolution voxelised head phantom for medical physics applications. Phys Med 33:182-188
Sadrozinski, H F-W; Geoghegan, T; Harvey, E et al. (2016) Operation of the Preclinical Head Scanner for Proton CT. Nucl Instrum Methods Phys Res A 831:394-399
Johnson, Robert P; Bashkirov, Vladimir; DeWitt, Langley et al. (2016) A Fast Experimental Scanner for Proton CT: Technical Performance and First Experience with Phantom Scans. IEEE Trans Nucl Sci 63:52-60
Plautz, Tia E; Bashkirov, V; Giacometti, V et al. (2016) An evaluation of spatial resolution of a prototype proton CT scanner. Med Phys 43:6291
Bashkirov, V A; Schulte, R W; Hurley, R F et al. (2016) Novel scintillation detector design and performance for proton radiography and computed tomography. Med Phys 43:664-74
Bashkirov, Vladimir A; Johnson, Robert P; Sadrozinski, Hartmut F-W et al. (2016) Development of proton computed tomography detectors for applications in hadron therapy. Nucl Instrum Methods Phys Res A 809:120-129
Plautz, Tia; Bashkirov, V; Feng, V et al. (2014) 200 MeV proton radiography studies with a hand phantom using a prototype proton CT scanner. IEEE Trans Med Imaging 33:875-81
Sadrozinski, H F-W; Johnson, R P; Macafee, S et al. (2013) Development of a Head Scanner for Proton CT. Nucl Instrum Methods Phys Res A 699:205-210

Showing the most recent 10 out of 17 publications