Through a 10-year collaboration between Boston University (BU) and the Massachusetts General Hospital (MGH), we have built insulin-only and bihormonal con?gurations of our bionic pancreas (BP) and extensively tested them in inpatient, outpatient, and real-world home-use studies in people with type 1 diabetes (T1D). We have also con- ducted preliminary clinical studies testing the insulin-only con?guration of our BP in people with type 2 diabetes (T2D) and the glucagon-only con?guration of our BP in people with chronic hypoglycemia. Over the past 3 years, we have built and tested progressive generations of a stand-alone, fully integrated, BP device, which we call the iLet, that integrates our micro-precision dual-infusion pump with a continuous glucose monitor (choice of either the Dexcom or Senseonics) and our clinically tested suite of mathematical control algorithms that autonomously determine and command insulin and glucagon doses based on continuous sensor glucose data. The development effort of the iLet platform began in the Co-PI's lab at BU in 2014 and was then translated to Beta Bionics in January 2016. Development of the third-generation iLet (the Gen 3 iLet) took place at Beta Bionics throughout 2017 and into early 2018. Our clinical partners at MGH and Stanford University will begin clinical trials testing the Gen 3 iLet in a home-use setting in adults with T1D in May 2018. The objective of this Fast Track application is to integrate all of the cumulative experience, technology, and innovation that we have assembled in the Gen 3 iLet, into the design and development of a highly reliable, easily serviceable, and commercially scalable, Gen 4 iLet, which is intended for broad distribution in the US and other worldwide markets. The objective of Phase I of this project is to leverage what we learn from the preclinical and clinical studies of the Gen 3 iLet to inform, de?ne, and implement the ?nal design and use requirements of our commercially scalable Gen 4 iLet and iLet disposables and to build the ?rst clinical-ready devices suitable for the ?nal pivotal trial required for a premarket approval (PMA) application to the FDA. The objective of Phase II is to progressively improve automation and scalability in the manufacturing and distribution processes that will make the Gen 4 iLet commercially viable and widely accessible to meet the largest possible demand it will need to serve. These objectives will be achieved with the following speci?c aims: (1) to implement the ?nal design and use requirements of our commercially scalable Gen 4 iLet (and its associated disposables), which will be informed by data obtained from clinical studies of our Gen 3 iLet system, and then to build the ?rst clinical-ready prototypes of the Gen 4 iLet system and submit the investigational device exemption (IDE) application to the US FDA for the Gen 4 iLet system, and (2) to acquire, install, and validate manufacturing machinery that will transition several of our manual assembly processes to fully or partially automated processes, thus optimizing the ef?ciency of our manufacturing operations by continuously improving and advancing the process and technology used in the production of the Gen 4 iLet and iLet administration set.

Public Health Relevance

Good, consistent management of blood sugar levels in people with type 1 diabetes is essential to preventing and minimizing health complications. We have developed a new fully integrated and wearable bionic pancreas medical device (referred to as the iLet) that will automatically manage blood sugar levels in people with type 1 diabetes and thus reduce the burden of diabetes care. The aims of this project are (1) to leverage the clinical data gathered using our investigational iLet system to implement the ?nal design and use requirements for our commercial iLet system, and then to build the ?rst clinical-ready prototypes of our commercial iLet system and submit the investigational device exemption (IDE) application to the US FDA for the commercial system; and (2) to acquire, install, and validate manufacturing machinery that will automate and optimize manufacturing operations used in the production of the iLet and iLet accessories.

Agency
National Institute of Health (NIH)
Institute
National Institute of Diabetes and Digestive and Kidney Diseases (NIDDK)
Type
Small Business Innovation Research Grants (SBIR) - Phase II (R44)
Project #
1R44DK120234-01
Application #
9681240
Study Section
Special Emphasis Panel (ZRG1)
Program Officer
Arreaza-Rubin, Guillermo
Project Start
2018-09-15
Project End
2019-08-31
Budget Start
2018-09-15
Budget End
2019-08-31
Support Year
1
Fiscal Year
2018
Total Cost
Indirect Cost
Name
Beta Bionics, Inc.
Department
Type
DUNS #
080018506
City
Boston
State
MA
Country
United States
Zip Code